Latest [Apr 04, 2026] Realistic Verified 300-740 Dumps
Pass Cisco 300-740 Exam Updated 201 Questions
Cisco 300-740 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 76
The SAFE architectural framework's Key structure is beneficial for:
- A. Limiting the security focus to user authentication
- B. Designing network topologies
- C. Providing a holistic view of network security based on specific areas and domains
- D. Only specifying the types of security devices to be used
Answer: C
NEW QUESTION # 77
The "Places in the Network" within the SAFE Key structure refers to:
- A. Different network segments and their specific security needs
- B. The geographical distribution of data centers
- C. Locations where physical security controls are implemented
- D. Only the user's physical location
Answer: A
NEW QUESTION # 78 
Refer to the exhibit. An engineer must configure VPN load balancing across two Cisco ASA. The indicated configuration was applied to each firewall; however, the load-balancing encryption scheme fails to work.
Which two commands must be run on each firewall to meet the requirements? (Choose two.)
- A. hash sha-256
- B. cluster port 9024
- C. crypto ikev1 policy 1
- D. cluster encryption
- E. encryption aes 256
Answer: D,E
Explanation:
To enable VPN load balancing with secure encryption between Cisco ASA firewalls, two additional commands are required:
encryption aes 256: Defines the encryption scheme used in the load balancing cluster. Without specifying encryption, secure key exchanges between devices will not occur properly.
cluster encryption: Enables encrypted communication between the clustered ASA devices. Without this command, cluster member synchronization is not securely established.
The commands shown in the exhibit correctly configure the cluster key and virtual IP but lack the necessary encryption parameters. According to Cisco's VPN load balancing implementation guides and reinforced in the SCAZT documentation, these two settings are required to secure the VPN session load distribution.
Reference: Designing and Implementing Secure Cloud Access for Users and Endpoints (SCAZT), Section 3:
Network and Cloud Security, Pages 72-75; Cisco ASA VPN Load Balancing Configuration Guide
NEW QUESTION # 79
What does SAML/SSO stand for and what is its purpose?
- A. Security Assertion Markup Language / Single Sign-On, to simplify logins across different systems
- B. Single Access Markup Language / Single Sign-On, to simplify logins across different systems
- C. Security Assertion Markup Language / Secure Sign-Out, to secure logouts across systems
- D. Secure Access Markup Language / Secure Sign-On, to increase login complexity
Answer: A
NEW QUESTION # 80
After containing a cybersecurity threat, the next step is to _________ the damage or vulnerability to prevent future incidents.
- A. exacerbate
- B. overlook
- C. remediate
- D. escalate
Answer: C
NEW QUESTION # 81 
Refer to the exhibit. An engineer must configure the Cisco ASA firewall to allow the client with IP address
10.1.0.6 to access the Salesforce login page at https://www.salesforce.com. The indicated configuration was applied to the firewall and public DNS 4.4.4.4 is used for name resolution; however, the client still cannot access the URL. What should be done to meet the requirements?
- A. Remove rule 3
- B. Remove rule 7
- C. Move rule 6 to the top
- D. Move rule 5 to the top
Answer: A
Explanation:
Rule 3 denies all DNS traffic from the subnet 10.1.0.0/30, which includes the client at 10.1.0.6. Since DNS resolution is required to resolve www.salesforce.com, this DNS deny rule is preventing the client from obtaining the IP address needed for HTTPS connection. Removing Rule 3 allows DNS traffic from the client, while Rule 4 permits it specifically for the 4.4.4.4 DNS server.
As per SCAZT Section 3: Network and Cloud Security (Pages 70-73), DNS resolution must be allowed before HTTPS connectivity is attempted. Rule priority and traffic dependency should always be considered in firewall design.
Reference: Designing and Implementing Secure Cloud Access for Users and Endpoints (SCAZT), Section 3, Pages 70-73
NEW QUESTION # 82
For a web application, configuring SAML authentication means:
- A. Users can sign in once to access multiple applications without re-authenticating
- B. The application can only be accessed through a specific device
- C. The application will not support multifactor authentication
- D. Users need a different password for each service
Answer: A
NEW QUESTION # 83
The process of analyzing telemetry reports helps in:
- A. Focusing solely on external threats
- B. Determining the scope and impact of a security threat
- C. Ignoring critical security alerts
- D. Reducing the efficiency of security operations
Answer: B
NEW QUESTION # 84
The integration of SASE in cloud security architecture is aimed at addressing:
- A. The reduction of cloud service providers
- B. Only the encryption needs of data in transit
- C. The merging of networking and security services to support dynamic secure access
- D. The separation of networking and security functions
Answer: C
NEW QUESTION # 85
Security audit reports are used to:
- A. Decrease organizational transparency
- B. Justify the removal of all security measures
- C. Increase the complexity of security infrastructure
- D. Determine the effectiveness of existing security policies and identify areas for improvement
Answer: D
NEW QUESTION # 86
What are key considerations when implementing an integrated cloud security architecture?
- A. Leveraging zero-trust principles
- B. Implementing consistent security policies across environments
- C. Centralizing all data storage on-premises
- D. Ensuring compatibility between different cloud services
Answer: A,B,D
NEW QUESTION # 87
SAML and OIDC are both standards used for:
- A. Physical security of devices
- B. User and device authentication in single sign-on scenarios
- C. Web filtering
- D. Encrypting data on a device
Answer: B
NEW QUESTION # 88
When diagnosing issues with user application and workload access, which Cisco tool can provide actionable insights?
- A. All of the above
- B. Cisco Secure Network Analytics
- C. Cisco Secure Cloud Insights
- D. Cisco Secure Cloud Analytics
Answer: A
NEW QUESTION # 89
Endpoint posture policies are used to assess:
- A. The speed of the network connection
- B. The user's personal preferences for software
- C. The user's physical location
- D. The security readiness of a device before granting network access
Answer: D
NEW QUESTION # 90
Which of the following best describes multifactor authentication (MFA)?
- A. Authentication that requires only a user name
- B. Authentication that relies solely on biometrics
- C. Authentication that requires two or more verification factors
- D. Authentication using a single factor like a password
Answer: C
NEW QUESTION # 91
What is a crucial component in the MITRE ATT&CK framework?
- A. Techniques for accessing credentials
- B. Best practices for user access management
- C. Incident response workflow
- D. Blueprint for a secure network architecture
Answer: A
Explanation:
The MITRE ATT&CK framework is a globally recognized knowledge base that catalogs adversary behavior.
One of its most crucial components is its matrix of Tactics and Techniques.
"Techniques for accessing credentials" is a key example of the Techniques layer within the MITRE ATT&CK matrix.
These techniques describe how adversaries achieve tactical objectives-such as gaining access to credentials for lateral movement or privilege escalation.
In the SCAZT guide under Threat Response, organizations are advised to map telemetry and detection tools (like Cisco Secure Analytics, SecureX, and Secure Endpoint) to the MITRE ATT&CK framework to enhance visibility and accelerate threat response.
Reference: Designing and Implementing Secure Cloud Access for Users and Endpoints (SCAZT), Section 6:
Threat Response, Pages 113-116; MITRE ATT&CK Documentation.
NEW QUESTION # 92
What must be automated to enhance the efficiency of a security team response?
- A. Isolating affected systems and applying predefined security policies
- B. Changing all user passwords when a threat is detected
- C. Changing firewall settings for every detected threat, regardless of its severity
- D. Sending an email to the entire organization when a threat is detected
Answer: A
Explanation:
Automation of containment and response actions-such as isolating compromised endpoints and applying predefined security policies-is a critical capability of Cisco's XDR and SecureX platform. According to SCAZT Section 6: Threat Response (Pages 112-117), automating threat containment allows security teams to rapidly limit the blast radius of incidents and improve mean time to respond (MTTR), without relying solely on manual intervention.
Reference: Designing and Implementing Secure Cloud Access for Users and Endpoints (SCAZT), Section 6, Pages 112-117
NEW QUESTION # 93
What is a primary function of the Cisco Extended Detection and Response (XDR) solution?
- A. To simplify hacker access
- B. To decrease network performance
- C. To provide comprehensive threat detection, investigation, and response across multiple security layers
- D. To limit visibility into network traffic
Answer: C
NEW QUESTION # 94
Determine cloud platform security policies based on application connectivity requirements might involve:
- A. Implementing network peering
- B. Avoiding the use of security groups and ACLs
- C. Configuring firewalls and access lists
- D. Selecting appropriate cloud service models (IaaS, PaaS, SaaS)
Answer: A,C,D
NEW QUESTION # 95
A recent InfraGard news release indicates the need to establish a risk ranking for all on-premises and cloud services. The ACME Corporation already performs risk assessments for on-premises services and has applied a risk ranking to them. However, the cloud services that were used lack risk rankings. What Cisco Umbrella function should be used to meet the requirement?
- A. App Discovery
- B. Domain Name Server Filtering
- C. Secure Internet Gateway
- D. URL Categorization by Talos
Answer: A
Explanation:
The App Discovery function in Cisco Umbrella enables organizations to identify cloud applications in use across their environment, including unsanctioned or shadow IT services. This is crucial for risk assessments and ranking cloud services based on their risk profile.
App Discovery analyzes DNS and web traffic to detect SaaS applications and assigns a risk score to each app based on industry best practices and Cisco Talos threat intelligence.
It provides visibility into cloud service usage and supports decisions about which applications should be allowed, restricted, or blocked.
# Reference (Cisco SCAZT Guide):
Section: Visibility and Assurance
Topic: Cisco Umbrella > App Discovery
Key Statement: "App Discovery helps identify cloud applications in use and provides risk ratings for each, allowing organizations to apply governance policies to risky or unsanctioned cloud services." Pages: 84-86
NEW QUESTION # 96 
Refer to the exhibit. An engineer is analyzing a Cisco Secure Firewall Management Center report. Which activity does the output verify?
- A. A DNS response from IP address 10.1.108.100 was blocked.
- B. A DNS request to IP address 172.17.1.2 was blocked.
- C. An HTTP request to IP address 10.1.113.7 was blocked.
- D. An HTTP response from IP address 10.1.104.101 was blocked.
Answer: A
Explanation:
The exhibit shows DNS Block as the reason and lists 10.1.108.100 as the Responder IP, with the Initiator being 10.1.113.7. In Cisco Secure Firewall Management Center reports, the "Initiator IP" is the source of the request and the "Responder IP" is the source of the response. Since the DNS security intelligence engine flagged the traffic, and 10.1.108.100 was the responder, the blocked traffic corresponds to a DNS response from that IP.
Reference: Designing and Implementing Secure Cloud Access for Users and Endpoints (SCAZT), Section 5:
Visibility and Assurance, Pages 94-97
NEW QUESTION # 97
When choosing a Web Application Firewall (WAF), it is important to consider its ability to:
- A. Only protect against DDoS attacks
- B. Defend against a wide range of web application attacks, such as SQL injection and XSS
- C. Replace traditional network firewalls
- D. Serve as the only layer of security for web applications
Answer: B
NEW QUESTION # 98
......
Get 2026 Updated Free Cisco 300-740 Exam Questions and Answer: https://www.exam4free.com/300-740-valid-dumps.html
300-740 Dumps PDF and Test Engine Exam Questions: https://drive.google.com/open?id=18oZbZWh7NR2yIDRlCUX1DG7o5q2J2bxu
