[2021] Pass Juniper JN0-362 Premium Files Test Engine pdf - Free Dumps Collection New 2021 Realistic JN0-362 Dumps Test Engine Exam Questions in here Who should take the JN0-362 exam This exam is intended for learners who are pursuing routing and switching technologies and related platform configuration and troubleshooting skills. NEW QUESTION 23 Click the exhibit.A customer has two VLANs to extend [...]

[2021] Pass Juniper JN0-362 Premium Files Test Engine pdf - Free Dumps Collection [Q23-Q40]

Share

[2021] Pass Juniper JN0-362 Premium Files Test Engine pdf - Free Dumps Collection

New 2021 Realistic JN0-362 Dumps Test Engine Exam Questions in here


Who should take the JN0-362 exam

This exam is intended for learners who are pursuing routing and switching technologies and related platform configuration and troubleshooting skills.

NEW QUESTION 23
Click the exhibit.

A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.)

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C,D

 

NEW QUESTION 24
What are two benefits of using an OSPF designated router (DR)? (Choose two.)

  • A. Reduces the size of the link-state database.
  • B. Reduces router resources used.
  • C. Reduces LSA flooding throughout an OSPF area.
  • D. Reduces LSA flooding on a broadcast segment.

Answer: B,D

 

NEW QUESTION 25
What is the purpose of STP BPDUs?

  • A. to determine the least cost path
  • B. to determine the root bridge
  • C. to exchange MAC addresses
  • D. to determine the root-alternate port

Answer: A

 

NEW QUESTION 26
Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

  • A. The multi-hop statement is required for the BGP session to establish correctly
  • B. The configuration is for an external BGP session
  • C. The configuration is for an internal BGP session
  • D. The local-address statement is required for the BGP session to establish correctly

Answer: C,D

 

NEW QUESTION 27
What must be configured for all IBGP speakers in an AS to have consistent routing information?

  • A. Static routes to the EBGP gateways
  • B. Default routes to the IBGP gateways
  • C. Partial mesh of EBGP sessions between EBGP speakers
  • D. Full mesh of IBGP sessions between IBGP speakers

Answer: D

 

NEW QUESTION 28
Which two problems occur when increasing numbers of users are added to an Ethernet LAN with no switches present? (Choose two.)

  • A. Some devices will not see certain traffic
  • B. The MAC table sizes increase
  • C. There is a greater chance for collisions to occur
  • D. There is unnecessary consumption of network bandwidth

Answer: C,D

 

NEW QUESTION 29
Click the Exhibit button.

You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?

  • A. multipath
  • B. type external
  • C. type internal
  • D. export <policy name>

Answer: C

 

NEW QUESTION 30
You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?

  • A. Option D
  • B. Option B
  • C. Option A
  • D. Option C

Answer: D

 

NEW QUESTION 31
Which two Layer 2 protocols are supported on MX Series devices? (Choose two.)

  • A. RIP
  • B. RSTP
  • C. MSTP
  • D. BGP

Answer: B,C

 

NEW QUESTION 32
Click the Exhibit button.

Referring to the exhibit, which statement is correct?

  • A. R3 will not participate in the election process
  • B. R1 will not participate in the election process
  • C. R4 will be the designated router
  • D. R2 will be the designated router

Answer: A

 

NEW QUESTION 33
What is the correct description of an Area Border Router (ABR)?

  • A. An ABR is an OSPF router with at least one link in a Layer 2 area
  • B. An ABR is an OSPF router that injects routing information from outside the OSPF AS
  • C. An ABR is an OSPF router with links in two areas, connecting OSPF areas to the backbone
  • D. An ABR is an OSPF router with all of its links within an area

Answer: C

 

NEW QUESTION 34
Click the Exhibit.

You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will become active?

  • A. Route1
  • B. Route3
  • C. Route2
  • D. Route4

Answer: A

 

NEW QUESTION 35
What are three valid BGP message types? (Choose three.)

  • A. Keepalive
  • B. Refresh
  • C. Open
  • D. Hello
  • E. Route

Answer: A,B,C

 

NEW QUESTION 36
Click the Exhibit button.

Referring to the exhibit, which statement is correct?

  • A. Routes from 10.1.1.1 are less preferred than the default local preference
  • B. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
  • C. Routes from 10.3.3.3 are less preferred than the default local preference
  • D. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1

Answer: D

 

NEW QUESTION 37
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain.Which two tasks does the bridge perform in response to receiving a frame with an unknown unicast destination MAC address? (Choose two.)

  • A. It floods the frame out of all interfaces except the one on which is was received.
  • B. It learns the source MAC address.
  • C. It drops the frame.
  • D. It learns the destination MAC address.

Answer: A,B

 

NEW QUESTION 38
You are adding nonforwarding route reflectors to your network. Which three actions ensure that VPN routes are advertised properly? (Choose three.)

  • A. Add the route reflectors to the same IGP domain as their clients.
  • B. Use rib-groups to add IGP routes to inet.3 and/or inet6.3 on the route reflectors.
  • C. Use rib-groups to add VPN routes to inet.0 and/or inet6.0 on the route reflectors.
  • D. Add MPLS LSPs between the route reflectors and their client routers.
  • E. Add a static default route to inet.3 and/or inet6.3 on the route reflectors.

Answer: B,D,E

 

NEW QUESTION 39
A customer pays for the bandwidth on a per-packet basis. The network administrator wants to constrain costs and prevent Layer 2 loops on a multihomed Layer 2 WAN network.
Which technology would satisfy these requirements?

  • A. Multiple Spanning Tree Protocol
  • B. Rapid Spanning Tree Protocol
  • C. Loop protection
  • D. MPLS over GRE

Answer: C

 

NEW QUESTION 40
......

Updated Official licence for JN0-362 Certified by JN0-362 Dumps PDF: https://www.exam4free.com/JN0-362-valid-dumps.html