Exam4Free 1Z0-996-20 Dumps Real Exam Questions Test Engine Dumps Training
Oracle 1Z0-996-20 exam dumps and online Test Engine
Introduction to Oracle 1Z0-996-20: Oracle Utilities Customer Cloud Service 2020 Implementation Essentials Exam
The knowledge needed to implement and configure the services has been shown by a Certified Customer Cloud Service 2020 Specialist from Oracle Utilities, which covers customs information and financial transactions management, billing, managing rates and payments, monitoring overdue debt, equipment & components, measurements, VEE, use, fieldwork and service order management and optional measuring. Existing preparation and expertise in the profession is strongly recommended. The practice exams are designed to render the actual examination experience familiar to students. According to statistics, most students fail the fear of the unexpected not because of their training, but because of exam anxiety. Notes and practice exercises for the 1z0-996 exam dumps should be prepared. Certification assessment matters are focused on real-world situations which deal with real-time challenges, so it is really important for the applicant to have realistic expertise and understanding of operating in the area of customer cloud technology with Oracle utility applications alongside all the educational materials and tutorials.
Oracle 1Z0-996-20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 15 |
|
| Topic 16 |
|
| Topic 17 |
|
| Topic 18 |
|
| Topic 19 |
|
NEW QUESTION 42
What happens when a device's measuring components are reconfigured (a new measuring component will be read) at a service point?
- A. A device with a new configuration type is created.
- B. A new installation event is created to "install" (new device configuration).
- C. The original installation event is updated with the "removal" (expire old device configuration) and a new installation event is created to "install" (new device configuration).
- D. The original installation event is updated with the "removal" (expire old device configuration).
- E. A device with a new configuration type is created. Moreover, a new installation event is created to 'install" (new device configuration).
Answer: C
NEW QUESTION 43
Within the application, operational devices can be assets or components.
Which two statements are true about components? (Choose two.)
- A. Components can be installed at locations.
- B. Components are attached to assets.
- C. Components have a disposition that tracks their location and status.
- D. Components can't have specifications.
- E. Components are not a class of assets.
Answer: A,B
NEW QUESTION 44
How many Tenders can a Payment Event have?
- A. one Tender for each account the payment is applied to
- B. one Tender for each form of Payment submitted
- C. one Tender per Payment Event
- D. no Tenders for Payment Events, only Payment Segments
- E. no Tenders for Payment Events, only Payments
Answer: B
NEW QUESTION 45
New: An electric utility is starting an Advanced Meter Infrastructure (AMI) roll-out for their residential customers. The initial plan is to roll out devices from their manufacturer with potentially three different device models. The customer has not decided what head-end systems they will use to communicate with these devices. Based on the customer's initial roll-out strategy, the devices will have to be configured consistently to support existing tariffs for billing.
Which is a valid consideration to determine the setup of device type administrative data for this implementation?
- A. the device's date of manufacturer
- B. the model number
- C. valid head-end systems, valid device configuration types, and the electricity service type
- D. billing usage rules
Answer: A
NEW QUESTION 46
Which two are "Are SP and Device Ready?" state algorithms for Enable Service? (Choose two.)
- A. Create Usage Subscription
- B. Start Service Agreement
- C. Create Service Point
- D. Check for Measurement
- E. Customer Device Compatibility Check
Answer: D,E
NEW QUESTION 47
Using a base-supplied algorithm type, what is payment distribution priority typically determined by?
- A. Debt Age
- B. Customer Class and Debt Age
- C. Service Agreement Type's Priority and Debt Age
- D. Payment Type + Debt Age
- E. Customer Class and Service Agreement Type
Answer: B
NEW QUESTION 48
What can cause multiple bill lines for a rate component to be produced in a bill calculation header?
- A. change in Bill Factor
- B. change in Rate Schedule
- C. changes in Rate Schedule and Bill Factor
- D. change in Rate Version Calculation Group
- E. changes in Rate Version Calculation Group and Bill Factor
Answer: C
NEW QUESTION 49
Which option correctly describes the high-level process from loading measurements through calculating usage?
- A. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Update Initial Measurements - B. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Calculate Usage - C. 1. Load Initial Measurements
2. Verify, evaluate, and enter Initial Measurements
3. Create Final Measurements
4. Calculate Usage - D. 1. Load Initial Measurements
2. Validate, evaluate, and estimate Initial Measurements
3. Update Initial Measurements
4. Calculate Usage
Answer: C
NEW QUESTION 50
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. Sum Check Validation
- B. Critical Validation
- C. Multiplier Check Validation
- D. Critical Validation, High/Low Check Validation, and Sum Check Validation
- E. High/Low Check Validation
Answer: C
NEW QUESTION 51
Which usage rule would be used to retrieve scalar measurements and convert the total from one unit of measure to another?
- A. Get Scalar Details and Axis Conversion
- B. A custom set of usage rules must be written.
- C. Get Scalar Details and Apply Formula
- D. Get Scalar Details and Math
Answer: A
NEW QUESTION 52
On which three entities can proration be disabled? (Choose three.)
- A. Bill Factor
- B. Calculation Rule
- C. Rate Schedule
- D. Calculation Rule Business Object
- E. Rate Version Calculation Group
Answer: C,D,E
NEW QUESTION 53
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Information
- B. Issue
- C. Complete
- D. Low
- E. Terminate
Answer: A,B,E
NEW QUESTION 54
Which statement correctly describes the relation between a device and a measuring component?
- A. A device can have any combination of interval and/or scalar measuring components.
- B. A device should have only one measuring component type.
- C. Two measuring components on the same device should have the same Units of Measure (UOM).
- D. A device configuration links a device only to interval channels.
Answer: A
NEW QUESTION 55
Measuring components are either subtractive or consumptive.
Which statement correctly describes these two concepts?
- A. Subtractive measuring components are associated with deductive meters, whereas consumptive measuring components are not.
- B. Subtractive measuring components are associated only with water service, whereas consumptive measuring components are for gas and electric services.
- C. A subtractive measuring component's consumption for a given period of time is the end measurement minus the start measurement. A consumptive measuring component's consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken.
- D. Subtractive measuring components are used to measure demand, whereas consumptive measuring components are used to measure how much was consumed since the previous reading.
Answer: D
NEW QUESTION 56
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributes of a measuring component?
- A. Channel Multiplier and Channel ID
- B. Serial Number and Badge Number
- C. Channel ID and Badge Number
- D. Model and Serial Number
- E. Manufacturer and Model
Answer: B
NEW QUESTION 57
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control if and how the General Ledger entries are created.
- B. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
- C. They control when a Financial Transaction is to be swept onto a bill.
- D. They control how the current balance is affected.
- E. They control how the payoff balance is affected.
Answer: A,C,E
NEW QUESTION 58
How many bill segment-related financial transactions do Payment Arrangements have?
- A. depends on the number of bills that will contain the customer's payment arrangement details
- B. unlimited
- C. none
- D. one
- E. depends on the number of payments that are part of the payment arrangement
Answer: D
Explanation:
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)
NEW QUESTION 59
At what stage in the initial measurement data (IMD) import process will the application of meter multipliers be performed?
- A. post-VEE
- B. Prepare for VEE
- C. VEE
- D. Critical Validation
Answer: D
NEW QUESTION 60
Which major entities hold the key geographic, demographic, and financial information related to a customer who is financially responsible for a property?
- A. Account, Customer Class, Premise, Service Agreement, Service Port
- B. Account, Customer Class, Person, Premise, Service Agreement
- C. Account, Person, Premise, Service Agreement, Service Port
- D. Account, Bill, Customer Class, Premise, Service Agreement
- E. Account, Bill, Premise, Service Agreement, Service Port
Answer: C
NEW QUESTION 61
When a service agreement is created, it is based on a template called the Service Agreement Type (SA Type) and values may be defaulted from a Start Option.
Which three attributes can get defaulted from a Start Option? (Choose three.)
- A. Terms and Conditions
- B. CIS Division
- C. Contract Quantities
- D. Rate
- E. Service to be billed
Answer: A,C,E
NEW QUESTION 62
......
How to Prepare Oracle 1Z0-996-20: Oracle Utilities Customer Cloud Service 2020 Implementation Essentials Exam
Preparation Guide Oracle 1Z0-996-20: Oracle Utilities Customer Cloud Service 2020 Implementation Essentials Exam
Introduction
The 2019 Implementation Essentials Certification Exam of Oracle Services Customer Cloud Service certifies that the applicant understands Oracle Services Customer Cloud technologies. The Oracle 1z0-996 Exam is also called this credential and it is a benchmark for employees worldwide recognized experience and skills. Oracle is a global US information technology corporation with headquarters in California. Oracle is a global organisation developing enterprise tech apps. Oracle offers a range of cloud technologies and platforms as well as hardware and resources that help businesses grow their operations. Data management, business analytics, IT operations management, enterprise resource planning, security, and emerging technologies are the focus of Oracle’s applications. Oracle is best known for its cloud software and technology. Oracle Cloud, a relational Database Management System (DBMS), is one of the most popular corporate database products. Oracle also designs and installs software and solutions for middle-stage information management systems, CRM systems (HCM), enterprise resource planning systems (ERP), and supply chain management systems (SCM). A Multi Model Database Management System is the Oracle Database Foundation, widely known as Oracle Database Management System (DBMS). It is a commonly used database to carry out database analysis and data storage functions. Oracle Database is available on server, premises or a mixed cloud system through a variety of service providers. This exam guide gives a brief introduction to the topics of 1z0-996-20 practice exams and 1z0-996-20 dumps.
Oracle 1Z0-996-20: Selling Oracle Utilities Customer Cloud Products and Solutions: https://www.exam4free.com/1Z0-996-20-valid-dumps.html
