Exam4Free C_ACDET_2506 Dumps Real Exam Questions Test Engine Dumps Training
SAP C_ACDET_2506 exam dumps and online Test Engine
NEW QUESTION # 10
During the configuration of a new custom field, after it's been saved but before the field has been Published, you realize that you set the wrong type of the field.
What is the next step you should take to resolve the issue?
- A. Mark the field as Hidden, and create a new field with a slightly different name and the intended field Type
- B. Delete the field and create a new field with the same name and the intended field type
- C. Change the field Type by selecting the intended type in the dropdown and Save
- D. Clear and recreate the field with same field name and the intended field type
Answer: B
NEW QUESTION # 11
Which of the following accurately describes the migration of flex master data templates using the migration tool?
- A. Neither the templates nor the data is migrated using the tool
- B. Both the templates and their data are fully migrated by the tool.
- C. Only the data of the flex master data templates is migrated; templates must bee created manually.
- D. The templates are migrated by the tool, but the data must be loaded manually later.
Answer: D
NEW QUESTION # 12
When you have created a new custom field and marked it as reportable, saved and published your changes, but the field does not show up in reports. How can you resolve the issue?
- A. Run the "Retrieve flexible fields metadata for reporting" task under Reporting Manager.
- B. You did not assign the custom field to the appropriate report category.
- C. Wait 2 hours for the schema to refresh automatically.
- D. Custom fields must be created in the same module where reports are generated.
Answer: A
Explanation:
After publishing a custom reportable field, the"Retrieve flexible fields metadata for reporting" task must be runto update the reporting schema with the new field metadata. Without this manual step, the reports do not recognize the new field despite it being published. The system does not perform automatic timed refreshes of the schema. Module location or report category assignment is not a prerequisite for report visibility in SAP Ariba's analytics.
NEW QUESTION # 13
Which Activate phase is tied to performing configurations in your SAP Ariba Strategic Sourcing suite solution?
- A. Setup
- B. Realize
- C. Configure
- D. Deploy
Answer: B
NEW QUESTION # 14
A customer requests a dynamic list from CSV. Which field type supports that?
- A. Computed Field
- B. Single-Select Enum
- C. Flex Master Data-based field
- D. Hyperlink
Answer: C
Explanation:
TheFlex Master Data (FMD)-based fieldtype supports dynamic lists sourced from CSV uploads. FMD fields act like advanced picklists that can contain thousands of values, imported via CSV templates defining the master data structure and entries. These fields are searchable, scalable, and ideal for large or frequently changing datasets.
Single-select enumerations are static lists manually defined and cannot import large CSV datasets. Computed fields calculate values dynamically based on expressions and are not designed for listing selectable values.
Hyperlink fields store URLs, unrelated to selection lists.
FMD fields are the preferred approach when a customer requires large or frequently updated lookup lists in sourcing projects or contracts.
NEW QUESTION # 15
You have defined a custom field to have a default value based on another field. You have verified that the defaulting happens correctly the first time. However, when the dependent field change value, your custom field does not change.
What scenarios could cause this? Note: There are 3 correct answers to this question.
- A. Your dependent field does not have the property Refresh screen on value change enabled
- B. Your custom field has the property Respect User Value enabled, and the user has manually entered another value into the field
- C. The defaulting Expression sets a value that violates the custom field Validity Condition
- D. The custom field has the property Lock Inital value enabled, which prohibits a field to be changed once it's set
- E. The parameter Application.Base.RecomputeValueOnFieldChange is not enabled
Answer: A,B,D
NEW QUESTION # 16
When you create a custom field, how do you define where the field is added?
- A. The field is added to a class, identified by the record ID
- B. The field is added to a class, identified by a class name
- C. The field is added to a project header, identified by the templateClass ID
- D. Each field can be linked to multiple screens, identified via UI GroupClass ID
Answer: B
Explanation:
In SAP Ariba,custom fields are associated with a specific class identified by its class name, such as ContractWorkspace or ProcureLineItem. This class-level association determines where the field is available within the application. When added to a parent class, the field inherits to all its subclasses, affecting all relevant data objects. The field is not linked via UI group IDs, project templates, or record IDs, which relate to different configuration aspects. This class-based design supports consistent data models and inheritance in SAP Ariba's architecture.
NEW QUESTION # 17
If you add a custom field to the ContractWorkspace class, which other class(es) will that field be added to?
- A. ContractRequest
- B. AbstractContractWorkspace
- C. InternalContractWorkspace and SalesContractWorkspace
- D. SalesContractRequest and InternalContractRequest
Answer: C
Explanation:
TheContractWorkspace class is a parent class to both InternalContractWorkspace and SalesContractWorkspaceclasses in SAP Ariba. When a custom field is added to ContractWorkspace, it automatically inherits down to both these subclasses, making the field available in both internal and sales contract workspace types. It does not propagate upward to AbstractContractWorkspace or into contract request classes. This inheritance model is part of SAP Ariba's class hierarchy to ensure consistent data structures across related contract objects.
NEW QUESTION # 18
Which scenarios are applicable when moving templates from the test site to the production site by Intelligent Configuration Manager (ICM)? (Select 2 correct answers)
- A. Published templates with flex master data references in the test site are migrated to the production site during the first migration attempt.
- B. Batch imports are available for templates when migrating configuration bundles.
- C. Draft templates on the source site are skipped.
- D. New templates that successfully migrated to the production site are in Draft state.
Answer: C,D
Explanation:
ICM only migratespublished templates; draft templates are skipped (A). When templates are imported into production, they arrive indraft stateby default to allow review and publishing before use (C). Batch imports for templates (B) are not supported; migration is typically handled per template. Flex master data references require manual migration steps and are not migrated automatically during the initial template transfer (D).
NEW QUESTION # 19
When you have created a new custom field and marked it as reportable, saved and published your changes, the field does not show up in your reports. How can you resolve the issue?
- A. You forgot to run the task Retrieve flexible fields metadata for reporting under Manage > Administration > Reporting Manager > Flex Field Reporting
- B. You did not assign the custom field to the appropriate report category. Ensure that the field is linked to the correct category for it to appear in reports.
- C. You created the custom field in a different module. Custom fields must be created in the same module where the reports are generated to show up correctly.
- D. You need to wait 2 hours for the schema to refresh. Any change to the object model will be automatically synchronized to SAP Ariba Analytics on regular intervals
Answer: A
NEW QUESTION # 20
While working on editing a field for a customer, you notice that "Editable in full Contract Amendment" is not an option available in the advanced tab of field configuration.
What is likely the cause for this behavior? Note: There are 2 correct answers to this question.
- A. The field you are customizing is not in the contract workspace or request classes.
- B. A customization is in flight and needs to be cleared and reset prior to making this change.
- C. The field you are customizing is standard and therefore cannot be changed.
- D. The contract must be in an amendment state for this option to be visible in customizing
Answer: A,D
NEW QUESTION # 21
During a Bluefield migration, you discover missing flex master data templates.
What do you do?
- A. Use reporting workaround
- B. Ignore them
- C. Rebuild them manually in production
- D. Defer to post-go-live
Answer: C
NEW QUESTION # 22
You are performing a Brownfield migration for a customer with live transactions in their SAP Ariba Production environment. The customer plans to introduce new required fields for contract workspaces that are associated with flex master data templates and enumeration lists Based on the correct Brownfield process, what is the correct sequence of activities to avoid system errors or user disruption?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 23
What are the key characteristics of a Bluefield deployment scenario? (Select 2 correct answers)
- A. The customer already has an SAP Ariba Strategic Sourcing suite solution deployed
- B. The Production site may have live transactions
- C. Many team members have a naive perception of deploying software solutions
- D. The Test site has been configured using the SAP Bluefield template
Answer: A,B
Explanation:
ABluefield deploymentmeans the customer already has an SAP Ariba solution deployed (B), and the production system may be live with ongoing transactions (C). This requires careful, incremental migration to avoid disruption. There is no specific "Bluefield template" for test sites (D), and team perceptions (A) are irrelevant.
NEW QUESTION # 24
Who leads Suite Integration activities?
- A. Partner/Customer Functional Lead
- B. SAP Deployment Lead
- C. Customer Success Manager
- D. SAP Support
Answer: B
NEW QUESTION # 25
How can you set the order of your custom Contract Workspace fields? Note: There are 2 correct answers to this question.
- A. Select Field Configuration and under the advanced tab select property Sequence. Fields are sorted by this field in the UL. Once all changes are performed, publish all changes via Customizing Publish.
- B. Navigate to the UI where the class is presented, select Customize in the banner, select Edit, and drag and drop the fields in the order they should be presented. Once all changes are performed, publish all changes via Customizing → Publish
- C. The fields are presented in alphabetical order of the field label. By carefully choosing the
- D. Select Field Configuration, find the class, and select the Layout tab. Here you can drag and drop the order of the fields. Once all changes are performed, publish all changes via Customizing Publish.
Answer: B,D
NEW QUESTION # 26
Which of the following considerations are important when creating custom fields? (Select 2 correct answers)
- A. The data type of a field can be dynamically changed, depending on data type availability
- B. There's a limit to the number of fields, by data type, that can be added to a class
- C. Published field changes can be reverted via Un-publish to free up memory
- D. When a field has been created and published, that field type has been consumed from the number of available fields on the class
Answer: B,D
Explanation:
SAP Ariba allocatesa finite number of field "slots" per data type for each class. When a custom field is created and published, it consumes one of these slots. Therefore, there are limits to how many fields of each type you can create per class. Thedata type cannot be changed after creation, andun-publishing does not reclaim the allocated slot; you must delete the field to free resources. Planning field usage carefully avoids hitting these system limits.
NEW QUESTION # 27
While migrating form templates, you successfully exported all templates from the Test site.
However, when trying to import them into Production, you cannot find the correct folder.
What should you do to proceed without errors?
- A. Modify the form template files locally to bypass folder restrictions.
- B. Skip the import and inform the team the templates cannot be migrated.
- C. Upload the templates to any existing folder regardless of its purpose.
- D. Manually create the required folder in the Production site before importing
Answer: D
NEW QUESTION # 28
A French translation of a custom field label needs to be updated.
Where do you update it?
- A. AML & Translations Upload
- B. Layout tab
- C. Customization Manager → Views
- D. Field Configuration Label
Answer: A
NEW QUESTION # 29
Which syntax is used for writing custom Validity Conditions?
- A. Scheme
- B. Regular expression
- C. Python
- D. XML
Answer: B
Explanation:
SAP Ariba uses an expression language based on Object-Graph Navigation Language (OGNL) to define custom validity conditions on fields. Within these expressions,regular expressions (regex)are supported to perform complex pattern validations, such as validating email formats or custom string structures. Other programming languages like Python, Scheme, or XML are not supported for this purpose. The use of regular expressions within SAP Ariba's validity conditions provides powerful, flexible validation capabilities, allowing administrators to enforce data quality rules precisely at the field level, consistent with official SAP Ariba documentation on validation expressions.
NEW QUESTION # 30
What are the key characteristics of a Bluefield deployment scenario? Note: There are 2 correct answers to this question.
- A. The customer already has an SAP Ariba Strategic Sourcing suite solution deployed
- B. The Production site may have live transactions
- C. Many team members have a naive perception of deploying software solutions
- D. The Test site has been configured using the SAP Bluefield template
Answer: A,B
NEW QUESTION # 31
A customer requests a dynamic list from CSV.
Which field type supports that?
- A. Computed Field
- B. Single-Select Enum
- C. Flex Master Data-based field
- D. Hyperlink
Answer: C
NEW QUESTION # 32
Which data elements are shared in a Suite-Integrated Environment? (Select 3 correct answers)
- A. Exception Types
- B. Supplier Catalogs
- C. Users
- D. Suppliers
- E. User Group mapping
Answer: C,D,E
Explanation:
In a Suite-Integrated SAP Ariba environment,master data elements such as Suppliers, Users, and User Group mappings are shared across sourcing and procurement modules, enabling unified access and data consistency. Supplier Catalogs and Exception Types are not typically shared master data in this context. This integration supports seamless workflows and consistent security roles, enhancing usability and governance.
NEW QUESTION # 33
......
SAP C_ACDET_2506: Selling SAP Certified Associate Products and Solutions: https://www.exam4free.com/C_ACDET_2506-valid-dumps.html
Reliable C_ACDET_2506 Exam Tips Test Pdf Exam Material: https://drive.google.com/open?id=1Jrh1FN3_C9AFxxVzVgtG4-X3NgOT2YiM
