Nov-2021 VMware 2V0-41.20 Certification Real 2021 Mock Exam
2V0-41.20 Exam Questions and Valid PMP Dumps PDF
NEW QUESTION 42
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. tcpdump
- B. ifconfig
- C. ipconfig
- D. debug
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-E00A62C0C818.html
NEW QUESTION 43
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. Downlink interface
- B. Service interface
- C. Loopback Router Port
- D. VLAN Uplink
Answer: B
Explanation:
Explanation
"The service interface is a special-purpose port to enable services for mainly VLAN-based networks.
North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink"
NEW QUESTION 44
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh dumpxml <VM Name> | grep interfaceid
- B. virsh get-interface <VM Name>
- C. virsh show <VM Name> | grep interfaceid
- D. virsh list-interface <VM Name>
Answer: A
NEW QUESTION 45
Which CLI command shows syslog on NSX Manager?
- A. /var/log/sysloq/syslog.log
- B. get log-file auth.log
- C. show log manager follow
- D. get log-file syslog
Answer: C
NEW QUESTION 46
Which Network and Security virtualization solution provides network hybridity and mobility?
- A. NSX Intelligence
- B. NSX Advanced Load Balancer
- C. VMware HCX
- D. VMware Tanzu Service Mesh
Answer: C
NEW QUESTION 47
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh dumpxml <VM Name> | grep interfaceid
- B. virsh get-interface <VM Name>
- C. virsh show <VM Name> | grep interfaceid
- D. virsh list-interface <VM Name>
Answer: A
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 48
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh poweron <nsx-manager-ID>
- B. virsh start <NSX-Manager-Name>
- C. virsh start <NSX-Manager-ID>
- D. virsh poweron <nsx-manager-name>
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 49
Which is correct when deploying a NSX Edge in a KVM only environment?
- A. deploy NSX Edge VM with QCOW2 image
- B. deploy NSX Edge VM with ISO image
- C. deploy NSX Edge on a bare-metal server
- D. deploy NSX Edge VM with OVF template
Answer: C
NEW QUESTION 50
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. tcpdump
- B. ifconfig
- C. ipconfig
- D. debug
Answer: B
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-
NEW QUESTION 51
Which TraceFlow traffic type should an NSX administrator use for validating connectivity between App and DB virtual machines that reside on different segments?
- A. Multicast
- B. Anycast
- C. Unicast
- D. Broadcast
Answer: C
NEW QUESTION 52
The NSX Control Plane is responsible for which two functions? (Choose two.)
- A. receive and validate configuration from NSX Policy
- B. propagate topology information
- C. host API services
- D. push stateless configurations to forwarding engines
- E. maintain packet-level statistics
Answer: B,D
NEW QUESTION 53
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B,C
Explanation:
Explanation
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual
NEW QUESTION 54
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. IGMP Snooping is used to populate multicast forwarding tables.
- B. Tier-0 gateways can be the Rendezvous Point.
- C. Multicast is supported in ESXi and KVM transport nodes.
- D. An Edge can be the Rendezvous Point.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf - E. Multicast routing is implemented with PIM Sparse-Mode.
Answer: A,E
NEW QUESTION 55
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)
- A. UDP
- B. TCP
- C. SSL
- D. SSH
- E. TLS
- F. HTTPS
Answer: A,B,E
NEW QUESTION 56
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. vm-support
- B. get support-bundle file vcpnv.tgz
- C. set support-bundle file vcpnv.tgz
- D. esxcli system syslog config logger set --id=nsxmanager
Answer: B
NEW QUESTION 57
An NSX administrator has configured a KVM hypervisor as a transport node.
Which kernel module on KVM implements a N-VDS?
- A. openvswitch
- B. dvswitch
- C. etherswitch
- D. nsx-vswitch
Answer: A
NEW QUESTION 58
Which two tools are used to configure centralized logging in NSX-T Data Center? (Choose two.)
- A. vRealize Log Insight
- B. vRealize Automation
- C. vRealize Network Insight
- D. Syslog Server
- E. vRealize Operations
Answer: A,D
NEW QUESTION 59
An NSX administrator has configured a KVM hypervisor as a transport node. Which kernel module on KVM implements a N-VDS?
- A. openvswitch
- B. etherswitch
- C. dyswitch
- D. nsx-vswitch
Answer: A
NEW QUESTION 60
Which statement describes the VMware Virtual Cloud Network Vision?
- A. Virtual Cloud Network connects and protects applications, regardless of their physical locations.
- B. Virtual Cloud Network connects and protects virtual machines running in vSphere environments.
- C. Virtual Cloud Network connects and protects applications and data, regardless of their physical locations.
- D. Virtual Cloud Network connects and protects virtual machines running in KVM environments.
Answer: C
NEW QUESTION 61
......
Professional VMware NSX-T Data Center 2V0-41.20 Certification Path
Before applying for Professional VMware NSX-T Data Center 2V0-41.20 Certification, applicants are required to have at least 6 months of experience with Linux and KVM. Another 1 year experience with VMware vSphere and its command line is required as an official prerequisite for this exam. However, the recommended knowledge and experience required is discussed in detail in the “Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam” section of this document. Kindly refer to this section for more information.
2V0-41.20 Question Bank: Free PDF Download Recently Updated Questions: https://www.exam4free.com/2V0-41.20-valid-dumps.html
2V0-41.20 Brain Dump: A Study Guide with Tips & Tricks for passing Exam: https://drive.google.com/open?id=1JCe--5DMNRFgjHpTuhhk1HtJWfDhrXSe
