[Nov 24, 2021] NS0-176 Practice Exam Dumps - 99% Marks In Network Appliance Exam
Updated Verified NS0-176 Q&As - Pass Guarantee or Full Refund
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Design | - Describe the storage components supported in FlexPod - Describe the networking components supported in FlexPod - Describe the compute components supported in FlexPod |
| Information Gathering for FlexPod Solutions | - Describe the main FlexPod components |
| FlexPod Troubleshooting | - Demonstrate how to perform FlexPod troubleshooting |
| FlexPod Configuration | - Describe how to install and configure the FlexPod components - Describe how to configure neworks in a UCS solution - Describe how to configure SAN boot in a FlexPod solution - Describe knowledge of how to configure a service profile - Demonstrate knowledge of how to configure storage in a FlexPod solution - Demonstrate knowledge of how to configure Cisco Nexus switches |
| FlexPod Administration | - Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices - Describe FlexPod management applications - Demonstrate knowledge of how to install and upgrade the FlexPod solution |
NetApp NS0-176 Exam Certification Details:
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Exam Registration | PEARSON VUE |
| Number of Questions | 60 |
| Passing Score | 68% |
| Exam Code | NS0-176 FlexPod |
| Exam Price | $150 USD |
| Sample Questions | NetApp NS0-176 Sample Questions |
| Duration | 60 minutes |
NEW QUESTION 18
Which two database types are supported with the VMWare vCenter 6.0 Server Appliance? (Choose two.)
- A. vPostgres (embedded)
- B. Oracle
- C. Microsoft SQL Server Enterprise
- D. Microsoft SQL Server Express
Answer: A,B
NEW QUESTION 19
You are asked to create an interface group on a NetApp clustered Data ONTAP system. The system is connected to a Cisco Nexus switch in a vPC configuration with the port-channel mode set to active.
Which NetApp interface group made matches this switch configuration?
- A. mode active
- B. singlemode
- C. multimode
- D. multimode_lacp
Answer: B
NEW QUESTION 20
Exhibit:
Referring to the exhibit, which two diagrams show the correct way to cable a new NetApp clustered Data ONTAP cluster with two nodes? (Choose two.)
- A. I
- B. IV
- C. III
- D. II
Answer: C,D
NEW QUESTION 21
Which three are characteristics of a NAS data LIF? (Choose three.)
- A. It can be associated with a Fibre Channel port.
- B. It is associated with the management LIF.
- C. It can be associated with an IP address.
- D. It is associated with the administrative Vserver.
- E. It can be associated with an interface group (ifgrp).
- F. It can be associated with a WWPN
- G. It can be associated with an Ethernet port or VLAN interface.
Answer: C,E,G
NEW QUESTION 22
Which aggregates should be disabled for data aggregates?
- A. Snapshot copies
- B. FCP
- C. SnapMirror copies
- D. iSCSI
Answer: A
NEW QUESTION 23
You want to run the FlexPod execution profile in NetApp Config Advisor.
Which three login credentials are required to perform this task? (Choose three.)
- A. Nexus switches
- B. NetApp support login
- C. UCS Manager
- D. NetApp cluster
- E. ESXi server
Answer: A,C,D
NEW QUESTION 24
How should the speed be configured on the Nexus 5548 port connecting to the Nexus 1100-X?
- A. Speed 1G
- B. Speed 1000
- C. Speed 1000000
- D. Speed 10
- E. It should not be configured - the 5548 will auto detect the correct speed
Answer: B
NEW QUESTION 25
When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used?
- A. Normal
- B. Trunk
- C. Edge
- D. Network
- E. Edge trunk
Answer: E
NEW QUESTION 26
While working on a performance related issue on your FlexPod solution, you notice an unequal distribution of traffic over the physical interfaces of a four port vPC between two Nexus 5000 switches. You would prefer a more even traffic distribution.
Which command would you use to accomplish this task?
- A. ~hardware multicast hw-hash~
- B. ~lacp system-priority~
- C. ~lacp rate fast~
- D. ~port-channel load-balance ethernet~
Answer: D
NEW QUESTION 27
Exhibit:
An administrator is building a FlexPod configuration with UCS 6296 Fabric Interconnect devices that support legacy Fibre Channel 9FC) connections. The administrator uses UCS Manager to configure the unified ports on the Fabric Interconnect.
Referring to the exhibit, how many ports will FC use after the configuration is completed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 28
Your UCS environment has recently been upgraded to include UCS B-Series Servers, UCS C-Series Servers, a UCS mini, and a fourth UCS domain. With these new changes, you need a management tool to help you manage the entire environment from a single location.
In this scenario, which tool would you use?
- A. Cisco Smart Advisor
- B. UCS Manager
- C. UCS Director
- D. UCS Central
Answer: D
NEW QUESTION 29
Refer to the exhibit.
What management tool may be used for creating virtual machines?
- A. System Center Virtual Machine Manager
- B. Hyper-V Manager
- C. MMC
- D. System Center Orchestrator
Answer: B
NEW QUESTION 30
Your customer has the storage configuration for a FlexPod solution shown below.
- FAS8040 HA-pair
- Disk stack one-4x DS4243 disk shelves (2TB SATA disk drives)
- Disk stack two- 2x DS 2246 disk shelves (1.2TB disk drives)
- There are no unused SAS ports on either controller
- There are no expansion slots available on either controller
The customer wants to attach a single DS2246 disk shelf with 800 GB SSD drives.
In this scenario, what are two ways to connect the new shelf for optimal performance? (Choose two).
- A. Cable a new stack for the SSD shelf.
- B. Cable the new shelf to the end of stack two.
- C. Cable the new shelf to the beginning of stack two.
- D. Cable the new shelf to the end of stack one.
Answer: A,C
NEW QUESTION 31
You are an administrator of a UCS system. You notice that when you apply a setting that requires a reboot, the affected hardware reboots immediately without warning. You would like to reboot to be acknowledged by an administrator instead.
What should you do to accomplish this task?
- A. Create a scrub policy.
- B. Create a maintenance policy.
- C. Create aa BIOS policy.
- D. Create updating templates.
Answer: B
NEW QUESTION 32
Your company has acquired a new NetApp EF600 storage array with a 25 Gbps HIC.
In this scenario, which FlexPod-supported protocol should be used to connect to this array?
- A. SMB
- B. NFS
- C. FC
- D. iSCSI
Answer: D
NEW QUESTION 33
An administrator has a FlexPod solution with VMware vSphere. The administrator is migrating all network traffic from standard switches to vSphere distributed switches.
Virtual machines (VMs) are currently using VM port groups called VLAN_500 and VLAN_501 on standard virtual switch vSwitch3. A new distributed switch called dvSwitch_VM is created and new distributed port groups are configured for each VM traffic VLAN. VMs are configured to use the new port groups.
After the change, VMs on VLAN 501 report a loss of network connectivity; however, VMs on VLAN 500 are not showing any connectivity issues. The symptoms are experienced for VMs on all ESXi hosts.
Which action must the administrator perform to solve the problem?
- A. Reboot the virtual machines to re-establish network connectivity.
- B. Create a new vmkernel port on dvSwitch_VM for VLAN 501.
- C. Configure the dvSwitch_VM port binding to Ephemeral.
- D. Add the correct VLAN ID to the new distributed port group for VLAN 501.
Answer: C
NEW QUESTION 34
You have a NetApp clustered Data ONTAP storage system and vSphere 6 cluster. You discover that VMware VAAI for NFS is not showing as enabled on one of the five ESXi hosts in your vSphere cluster.
In this scenario, what must you do to enable VAAI for NFS on that ESXi host?
- A. Enable NFSv3 on the storage system.
- B. Set the DataMover. HardwareAcceleratedInit advanced setting to 0 on the ESXi host.
- C. Install the NetApp NFS Plug-in for VMware VAAI on the ESXi host.
- D. Enable VMware vStorage for NFS on the NetApp SVM.
Answer: A
NEW QUESTION 35
How are jumbo frames enabled on the Nexus 5548?
- A. system qosmtu 9216
- B. policy-map type queueingclass type queueing class-defaultmtu 9216
- C. system jumbo-frame
- D. system mtu jumbo 9000
- E. policy-map type network-qos JUMBOclass type network-qos class-defaultmtu 9216system qosservice-policy type network-qos JUMBO
Answer: E
NEW QUESTION 36
Exhibit:
Your vSphere host is booting off an SD and is displaying the error shown in the exhibit.
What should you do to correct the problem?
- A. Update the current ESXi scratch location.
- B. Enable Unified Extensible Firmware Interface (UEFI).
- C. Reinstall ESXi on a larger SD card.
- D. Enable SD card mirroring.
Answer: A
NEW QUESTION 37
Which four items are required in order to create a Gold Master Boot LUN to automate the provisioning of Hyper-V hosts using the built-in LUN cloning capabilities of NetApp storage? (Choose four.)
- A. SysPrep of the server operating system
- B. Create a new interface group on the NetApp Cluster
- C. Creation of a service profile and zoning for Gold Master Boot LUN
- D. Create additional virtual fibre channel (vfc) interfaces for the Nexus 5500
- E. Creation of a LUN for the Gold Master Boot LUN
- F. Configuration of the Server OS and hotfix installation
Answer: A,C,E,F
NEW QUESTION 38
Exhibit:
You just finished cabling a UCS 5108 chassis to the Fabric Interconnects.
Which diagram in the exhibit is cabled correctly according to the CVD guidelines?
- A. I
- B. II
- C. IV
- D. III
Answer: C
NEW QUESTION 39
......
NS0-176 Real Valid Brain Dumps With 141 Questions: https://www.exam4free.com/NS0-176-valid-dumps.html
