Oracle 1z0-1086-22 Dumps Updated Oct 11, 2023 WIith 60 Questions
View All 1z0-1086-22 Actual Free Exam Questions Oct 11, 2023 Updated
Oracle 1z0-1086-22 exam is an excellent opportunity for professionals who want to demonstrate their expertise in Oracle Enterprise Data Management Cloud solutions. By passing the exam, professionals can differentiate themselves from their peers and demonstrate their commitment to their profession. Additionally, the Oracle 1z0-1086-22 exam is a valuable credential that can help professionals advance their careers and increase their earning potential.
NEW QUESTION # 28
Which two are valid data sources for importing dimensions?
- A. Tab-delimited files
- B. Maintenance snapshots
- C. Registered external applications
- D. Comma-delimited files
Answer: C,D
Explanation:
* Comma-delimited files: This option is correct because comma-delimited files are supported as a data source for importing dimensions and mappings into Enterprise Data Management Cloud.
* Registered external applications: This option is correct because registered external applications are supported as a data source for importing dimensions and mappings into Enterprise Data Management Cloud.
NEW QUESTION # 29
A request was submitted that triggered an approval policy. However, there are not enough approvers available to satisfy the terms of the policy.
What are two resolutions?
- A. After exceeding the defined number of approval notifications, the request is pushed back to the original submitter and must be submitted and approved again.
- B. The request is escalated to an application owner, who changes the approval policy to require fewer approvers, at which point the request is committed.
- C. The request is escalated to a data manager, who grants an exceptional approval and commits the request.
- D. The request is closed after exceeding the defined number of approval notifications and cannot be committed.
Answer: B,C
Explanation:
1. The request is escalated to a data manager, who grants an exceptional approval and commits the request: This option is correct because when there are not enough approvers available to satisfy the terms of the approval policy, the request is escalated to a data manager after exceeding the defined number of approval notifications. The data manager can then grant an exceptional approval and commit the request.
2. The request is escalated to an application owner, who changes the approval policy to require fewer approvers, at which point the request is committed: This option is correct because when there are not enough approvers available to satisfy the terms of the approval policy, the request is escalated to an application owner after exceeding the defined number of approval notifications. The application owner can then change the approval policy to require fewer approvers, and then approve and commit the request.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/approving-and-enriching-requests.html
NEW QUESTION # 30
You have a maintenance view that consists of the following viewpoints from different applications: GL Accounts, Consolidation Accounts, and Planning Accounts. You open a request and manually add a new account to GL Accounts.
In the same request, which two methods can you use to add the account to the other two viewpoints7
- A. Share manually: Drag and drop the new node from the GL Accounts viewpoint to the Consolidation and Planning viewpoints, after manually identifying the appropriate parents.
- B. Master alignment: Create a fourth viewpoint that represents a master combined account dimension and add the node there to insert it into all three applications.
- C. Automatic insert: Select the new node and run the auto-insert tool to automatically identify comparable parents in the other viewpoints and insert the new node under them.
- D. Compare and align: Run a comparison between the viewpoints to identify missing nodes. Search for the appropriate parents in the other viewpoints before dragging and dropping the new node to insert it into the other viewpoints.
Answer: A,D
Explanation:
Explanation
If you have a maintenance view that consists of viewpoints from different applications, and you open a request and manually add a new node to one of the viewpoints, you can use two methods to add the node to the other viewpoints: share manually or compare and align. Share manually means dragging and dropping the new node from one viewpoint to another viewpoint, after manually identifying the appropriate parents. This way, you can create new nodes in the target viewpoint that have properties derived or transformed from the source nodes using the node type converter and map binding. Compare and align means running a comparison between the viewpoints to identify missing nodes, then searching for the appropriate parents in the target viewpoint before dragging and dropping the new node to insert it into the target viewpoint. This way, you can also create new nodes in the target viewpoint that have properties derived or transformed from the source nodes using the node type converter and map binding. You cannot use master alignment or automatic insert methods, because these are not supported by Oracle Enterprise Data Management Cloud. References: Working with Requests - Oracle Help Center3; Comparing Viewpoints - Oracle Help Center
NEW QUESTION # 31
Which two methods are valid ways to create request items?
- A. By loading a text file
- B. By running a batch script with data changes
- C. Manually in a view
- D. By loading an Excel spreadsheet
Answer: C,D
Explanation:
You can create request items manually in a view or by loading an Excel spreadsheet." You cannot create request items by loading a text file or by running a batch script with data changes.
NEW QUESTION # 32
You are mapping nodes from dimensions in two source applications to a dimension in a single target application.
How do you set up the mapping hierarchy sets?
- A. Target nodes in one hierarchy set and converted source nodes in a separate hierarchy set
- B. Target nodes as parents and converted source nodes as children
- C. Separate hierarchy sets for each source-to-target relationship
- D. Target nodes and converted source nodes in two separate hierarchies
Answer: C
Explanation:
When you are mapping nodes from dimensions in two source applications to a dimension in a single target application, you need to set up separate hierarchy sets for each source-to-target relationship. This way, you can define the mapping rules and node type converters for each source node type and target node type pair. You cannot use target nodes and converted source nodes in two separate hierarchies, because this would not establish a mapping relationship between them. You cannot use target nodes in one hierarchy set and converted source nodes in a separate hierarchy set, because this would not allow you to export the mappings to the target application. You cannot use target nodes as parents and converted source nodes as children, because this would create a hierarchical relationship instead of a mapping relationship. Reference: Working with Hierarchy Sets - Oracle Help Center1; Creating Mapping Viewpoints - Oracle Help Center2
NEW QUESTION # 33
When you register an application, the system creates a default view that contains all your dimensions.
However, there may be situations where the default view is not enough and you need to create an alternate view and viewpoints.
Which three are situations where you create an alternate view and viewpoints?
- A. You need to give users access to the default view so that they have access to only one dimension.
- B. You need to create a maintenance view with multiple viewpoints from different applications so you can maintain all your dimension information in one place.
- C. You need to create a view to give users access to a limited set of data.
- D. You need an alternate view to share, compare, and map information across multiple applications.
- E. You need to create a validation view with multiple viewpoints from different dimensions so you can maintain all your application information in one place.
Answer: C,D,E
Explanation:
* You need to create a validation view with multiple viewpoints from different dimensions so you can maintain all your application information in one place: This option is correct because a validation view is a type of view that allows you to create multiple viewpoints from different dimensions and validate them against each other. You can use a validation view to maintain all your application information in one place and check for any errors or inconsistencies.
* You need to create a view to give users access to a limited set of data: This option is correct because a view is a type of data chain object that defines the scope of data that users can access and work with.
You can create a view to give users access to a limited set of data by specifying the node sets and hierarchy sets that are included in the view.
* You need an alternate view to share, compare, and map information across multiple applications:
This option is correct because an alternate view is a typeof view that allows you to create multiple viewpoints from different applications and share, compare, and map information across them. You can use an alternate view to synchronize and govern data across registered applications.
NEW QUESTION # 34
You have account dimensions in two different applications that must be kept in sync.
Given a business requirement that nodes added to either application must be shared with the other, what should you do?
- A. Create one bi-directional node type converter between the two applications.
- B. Create one node type converter with Application! accounts as the source and Application2 accounts as the target, and specify a reverse conversion in requests when sharing in the opposite direction.
- C. Create two node type converters: one with Application 1 accounts as the source and Application2 accounts as the target, and another with Application2 accounts as the source and Application 1 accounts as the target.
- D. Create three node type converters: one with Application! accounts as the source and Application2 accounts as the target, another with Application2 accounts as the source and Application! accounts as the target, and a third for bi-directional sharing.
Answer: C
Explanation:
According to the reference, "A node type converter is a data object that enables you to share nodes between different node types in different applications." To keep account dimensions in sync between two applications, you need to create two node type converters, one for each direction of sharing. You cannot create a bi-directional node type converter, or specify a reverse conversion in requests.
To keep account dimensions in two different applications in sync and share nodes added to either application with the other, you can create two node type converters. One node type converter can have application 1 accounts as the source and application 2 accounts as the target, and the other node type converter can have application 2 accounts as the source and application 1 accounts as the target. This will ensure that nodes added to either application are shared with the other. (Reference: Oracle Enterprise Data Management Cloud 2022 Implementation Essentials, Module 3)
NEW QUESTION # 35
Which statement is FALSE about unbound dimensions?
- A. You can use unbound dimensions to manage complex data sets such as related value sets, account combinations, and multi-dimensional mappings.
- B. You can load data into unbound dimension viewpoints by using request load files.
- C. You can extract data from unbound dimensions using extracts.
- D. Unbound dimensions are created as part of the application registration process, but do not get imported or exported.
Answer: D
Explanation:
Explanation
Unbound dimensions are created outside of the application registration process and do not get imported or exported. You can use unbound dimensions to manage complex data sets such as related value sets, account combinations, and multi-dimensional mappings in Oracle Enterprise Data Management Cloud. You can extract data from unbound dimensions using extracts and load data into unbound dimension viewpoints by using request load files. You cannot use unbound dimensions for importing and exporting data, because they are not bound to any external applications. References: Working with Unbound Dimensions - Oracle Help Center
NEW QUESTION # 36
A request has a status of "In Flight." In which stage of the approval workflow is the request?
- A. Review
- B. Approve
- C. Closed
- D. Submit
Answer: B
Explanation:
1. Approve: This option is correct because when a request has a status of "In Flight", it means that it is in the Approve stage of the approval workflow, where it is waiting for approvals from the approvers or data managers.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/approving-and-enriching-requests.html According to the Oracle Help Center, a request has a status of "In Flight" when it is in the Approve stage of the approval workflow. This means that the request is waiting for approval from one or more approvers. The other stages of the approval workflow are Submit, Review, and Closed.
NEW QUESTION # 37
Which three tasks can you automate with EPM Automate?
- A. Create and auto-submit change requests
- B. Recreate service
- C. Export and import snapshots
- D. Archive backups
- E. Import and export dimensions
Answer: C,D,E
Explanation:
Explanation
EPM Automate enables users to remotely perform tasks within Oracle Enterprise Performance Management Cloud environments. Some of the tasks that can be automated are: archive backups, import and export metadata, data, artifact and application snapshots, templates, and Data Management mappings; upload and download files; run business rules; copy data; and export and import snapshots. References: About EPM Automate - Oracle Help Center1
NEW QUESTION # 38
Which task can you perform after you have created an unbound dimension?
- A. You can select the unbound dimension in the application registration wizard or the import and export screens.
- B. You can create bindings for the unbound dimension, or use it for importing and exporting data.
- C. You can convert the unbound dimension to a bound dimension.
- D. You can use the unbound dimension just like a bound dimension when creating viewpoints and other user defined data chain objects.
- E. You can add bound or partially bound data chains to the unbound dimension.
Answer: D
Explanation:
Explanation
After you have created an unbound dimension, you can use it just like a bound dimension when creating viewpoints and other user defined data chain objects and properties. You can also create extracts for the dimension, and add permissions, policies, and custom validations. However, you cannot convert an unbound dimension to a bound dimension, because this is not supported by Oracle Enterprise Data Management Cloud.
You cannot create bindings for an unbound dimension, or use it for importing and exporting data, because unbound dimensions are not related to any external applications. References: Working with Unbound Dimensions - Oracle Help Center
NEW QUESTION # 39
You have mapped accounts from two different general ledger applications to your Planning application. What do you do when it's time to synchronize the changes by exporting the mappings?
- A. You run three exports, one for each source and one for the target.
- B. You run two separate exports, one for each source-to-target location.
- C. You run a single export for the target that contains all mappings for both sources.
- D. You run four exports, one for each viewpoint involved in the mapping.
Answer: B
Explanation:
Explanation
When you have mapped accounts from two different general ledger applications to your Planning application, you need to run two separate exports, one for each source-to-target location, when it's time to synchronize the changes by exporting the mappings. This way, you can export the mapping data from each source node type to the corresponding target node type using the appropriate node type converter and map binding. You do not need to run three exports, one for each source and one for the target, because this would not export the mapping data correctly. You do not need to run a single export for the target that contains all mappings for both sources, because this would not use the correct node type converters and map bindings for each source-to-target pair. You do not need to run four exports, one for each viewpoint involved in the mapping, because this would be redundant and inefficient. References: Working with Requests - Oracle Help Center3; Creating Mapping Viewpoints - Oracle Help Center
NEW QUESTION # 40
A subscription is triggered by changes in a source viewpoint. One item in the subscription request is invalid and auto-submit is enabled.
What happens next?
- A. All request items except the invalid item are automatically committed to the target viewpoint, and the subscription assignee is notified that an issue must be resolved for the outstanding item.
- B. The request is automatically rejected, and the subscription assignee is notified of the rejection.
- C. All request items are automatically committed to the target viewpoint, and the subscription assignee is notified.
- D. No request items are committed to the target viewpoint, and the subscription assignee is notified that an issue must be resolved before any items can be committed.
Answer: D
Explanation:
No request items are committed to the target viewpoint, and the subscription assignee is notified that an issue must be resolved before any items can be committed: This option is correct because when a subscription is triggered by changes in a source viewpoint and auto-submit is enabled, the request is automatically submitted for approval. However, if one or more items in the request are invalid, the request is not approved and no items are committed to the target viewpoint. The subscription assignee is notified that an issue must be resolved before the request can be approved and committed.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/creating-subscriptions.html
NEW QUESTION # 41
You are an assignee for a subscription that listens for changes in a source viewpoint, and auto-submit is not enabled.
What happens when a request is submitted that changes the source viewpoint?
- A. The system sends you a notification of the original source request, which you can then review and copy into your target viewpoint.
- B. The system sends you a notification of the original source request and includes a link to manually convert it to a new request for the target viewpoint.
- C. The system sends you a notification with an attachment of the original request items, which you can then load into a new request.
- D. The system converts the original request items into a new subscription request for the target viewpoint and sends you a notification to review and submit the request.
Answer: D
Explanation:
* The system converts the original request items into a new subscription request for the target viewpoint and sends you a notification to review and submit the request: This option is correct because when a subscription is triggered by changes in a source viewpoint and auto-submit is not enabled, the system creates a new subscription request for the target viewpoint with the same request items as the original request. The system then sends a notification to the subscription assignee to review and submit the request.
NEW QUESTION # 42
Which three compare types can you select when you run a comparison between two viewpoints?
- A. Compare node names
- B. Compare relationships
- C. Find missing nodes
- D. Compare properties
- E. Find shared nodes
Answer: B,C,D
Explanation:
Explanation
When you run a comparison between two viewpoints, you can select different compare types to identify differences or similarities between the viewpoints. The compare types that you can select are: find missing nodes, compare properties, compare relationships, and compare node names. Find missing nodes compares the nodes in both viewpoints and identifies nodes that exist in one viewpoint but not in the other. Compare properties compares the property values of nodes in both viewpoints and identifies nodes that have different property values. Compare relationships compares the parent-child relationships of nodes in both viewpoints and identifies nodes that have different parents. Compare node names compares the node names of nodes in both viewpoints and identifies nodes that have different names. Find shared nodes is not a compare type that you can select, because shared nodes are identified by the Core.Shared property rather than by comparison.
References: Comparing Viewpoints - Oracle Help Center
NEW QUESTION # 43
......
Oracle 1z0-1086-22 exam is a challenging test that requires a deep understanding of Oracle Enterprise Data Management Cloud solutions. It consists of 60 multiple-choice questions that must be answered within 105 minutes. 1z0-1086-22 exam is available in English, Japanese, and Simplified Chinese. Candidates must achieve a minimum score of 63% to pass the exam.
Oracle 1z0-1086-22 certification exam is ideal for professionals who work in IT departments, data management teams, or as data architects. 1z0-1086-22 exam covers a wide range of topics, including data modeling, data governance, data quality, data integration, and data security. 1z0-1086-22 exam is designed to test the candidate's practical knowledge and experience in implementing data management solutions using Oracle Enterprise Data Management Cloud 2022.
New 1z0-1086-22 Exam Questions Real Oracle Dumps: https://www.exam4free.com/1z0-1086-22-valid-dumps.html
Pass Authentic Oracle 1z0-1086-22 with Free Practice Tests and Exam Dumps: https://drive.google.com/open?id=1qi8B5XPFo-8od9Caae_91WCXI4wtSVW4
