ACP-01101 by Autodesk Actual Free Exam Questions And Answers [UPDATED 2024]
ACP-01101 Questions Truly Valid For Your Autodesk Exam!
NEW QUESTION # 11
Exhibit.
A CAD designer wants to use the clipboard method to copy the car block to a separate floor plan drawing, and the designer wants to make sure that it is pasted into the same position in the garage relative to the lower left-hand comer, as shown in the exhibit Which clipboard workflow should the designer use?
- A. Cut > Paste as Block
- B. Copy > Paste Special
- C. Copy with Base Point> Paste to Original Coordinates
- D. Copy with Base Point> Paste
Answer: C
Explanation:
* Select the Car Block:
* In the current drawing, select the car block.
* Copy with Base Point:
* Right-click and choose "Clipboard" > "Copy with Base Point".
* Specify the lower left-hand corner of the garage as the base point.
* Switch to the Target Drawing:
* Open the target drawing where you want to paste the car block.
* Paste to Original Coordinates:
* Right-click and choose "Clipboard" > "Paste to Original Coordinates".
* The car block will be pasted into the same position relative to the garage as in the original drawing.
References:
* AutoCAD User Guide on Clipboard Operations
* Autodesk Knowledge Network: Copying and Pasting Objects in AutoCAD
NEW QUESTION # 12
A drawing contains a Table sObject While trying to edit a cell, the CAD designer notices a chain link symbol with a padlock on it After selecting the cell, which method should the CAD designer use to edit the cell?
- A. Open the data link file and edit the cell
- B. Select the cell and change (he cell style.
- C. Double click the cell to change the text
- D. Open Properties and change the contents
Answer: A
Explanation:
Identify the Data Link: Select the table cell that shows the chain link with a padlock icon. This indicates it is linked to an external data source.
Locate the Data Link: Right-click the table and choose Data Links. Note the file path of the linked data file.
Open the Data Link File: Open the linked data file (e.g., an Excel spreadsheet) in its respective application.
Edit the Cell: Make the necessary changes to the cell in the external data file and save the changes.
Update in AutoCAD: Return to AutoCAD and the table should automatically update to reflect the changes made in the external file.
References:
* AutoCAD Help Documentation on Data Linking in Tables
NEW QUESTION # 13
Refer to exhibit.
(Note Exhibit shown is the AutoCAD interface in Windows which the AutoCAD tor Mac version diners in appearance, the correct answers correlate in the options.] Tim four tree list sheets need to be plotted to PDF al half stale (12x18).
The sheet drawings shown have a page setup named 12x10 PDF predefined Willi those settings.
What should the CAD designer do 10 plot the requested sheets?
- A. Set the Page Setup tor the tour sheets to 12x18 PDf and then click Publish
- B. Select the four sheets shown, change the Precision, and then click Publish
- C. Modify the settings in the Sheet Set PDF Publish Options and then click Publish.
- D. Set the PDI~ Preset option to AutoCAD PDI" (Half Scale) and then click Publish
Answer: A
Explanation:
Open the Sheet Set Manager: Type SHEETSET in the command line and press Enter.
Modify Page Setup: Right-click on the sheet set or individual sheets and select Properties.
Set Page Setup: Change the page setup to 12x18 PDF.
Publish: Click Publish to generate the PDF with the desired settings.
References:
* AutoCAD Help Documentation on Publishing Drawing Sheets
NEW QUESTION # 14
You place a red rectangular polyline over a PDF underlay in a drawing, and then use the rectangular polyline as a clipping boundary. The result is shown in the exhibit.
Select whether each statement is True or False.
Answer:
Explanation:
Explanation
False: You cannot create a new clipping boundary without removing the existing clipping boundary. If you want to change the clipping boundary, you have to select the PDF underlay, right-click and choose Remove Clipping Boundary first, and then use the Clip PDF command again with a different option12.
True: To access the Underlay Layers dialog box, you have to select a PDF underlay, right-click and choose PDF Layers2. In the Underlay Layers dialog box, you can click the light bulb icon for the layer name that you want to turn on or off2.
True: To use the Align command, you have to select a polyline, right-click and choose Align3. Then you have to specify two source points on the polyline and two destination points on the PDF underlay that correspond to each other3. You can also specify a third pair of points if needed3. Finally, you have to press Enter twice to confirm the alignment3. The statement "You can use the grips on the polyline to align to the edges and corners of the PDF underlay" is true. When you place a rectangular polyline over a PDF underlay and use it as a clipping boundary, the polyline's grips can be used to adjust its size and position so that it aligns with the edges and corners of the underlay.
By hovering the cursor over a grip, you can see its tooltip display the name of the grip and its function. If you then click and drag the grip, you can move it along its corresponding axis to resize the boundary. This allows you to adjust the clipping boundary to fit exactly over the content you want to display.
NEW QUESTION # 15
With an associative array selected as shown in the exhibit, which command will separate the objects into individual objects?
- A. Ungroup
- B. Disassociate
- C. Break
- D. Explode
Answer: D
Explanation:
array items are contained in a single array object, similar to a block. You can change the number of these items and their spacing in an associative array.
Based on 2, you can move an item in an associative array by pressing and holding the Ctrl key, and then selecting the items you want to move.
since explode is the command that separates objects into individual objects. Disassociate, ungroup and break are not valid commands for associative arrays.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/AutoCAD
NEW QUESTION # 16
A CAD designer is working on a project where the only drawing available is in POT format The designer imports the PDP into the drawing, but the text objects arc now polylines.
what needs to the done to convert the polylines to text objects.
- A. Use the Edit Polyline (PEDIT) command. Select all of the objects and use the Join option
- B. Use the Combine Text tool (TXT2MTXT) and select all of the objects.
- C. Use the JOIN command and select all of the objects.
- D. Use the Recognize SHX Text tool (PDFSHXTFXT) and select all of the objects
Answer: D
Explanation:
* Issue with PDF Text Objects:
* When importing a PDF into AutoCAD, text objects may be converted to polylines.
* This happens because AutoCAD interprets the text as vector graphics rather than editable text.
* Conversion Process:
* Option A: The Combine Text tool (TXT2MTXT) is used to combine multiple text objects into a single multiline text object. It does not convert polylines back to text.
* Option C: The Edit Polyline (PEDIT) command and Join option are used to join polylines, not convert them to text.
* Option D: The JOIN command is similar to PEDIT and is used for joining polylines.
* Correct Tool:
* Option B: The Recognize SHX Text tool (PDFSHXTEXT) is specifically designed to recognize text that has been converted to polylines during PDF import. It converts these polylines back into text objects.
* Conclusion:
* Use the Recognize SHX Text tool to select all polyline text objects and convert them back to editable text.
References:
* AutoCAD Knowledge Base on PDF Import and Text Recognition.
* AutoCAD 2024 User Guide on PDF Import Tools.
NEW QUESTION # 17
Exhibit.
A CAD designer needs two viewports at different scales in a layout The text and the arrowheads of the dimensions need to be displayed al the same size in both viewports in paper space.
What should the designer use to display all text and arrowheads at the same size?
- A. An associative dimension
- B. MSLTSCALE
- C. An annotative dimension style
- D. PSLT SCALE
Answer: C
Explanation:
Create or Modify Dimension Style: Type DIMSTYLE in the command line and press Enter. Create a new dimension style or modify an existing one.
Set as Annotative: In the Dimension Style Manager, go to the Fit tab and check the Annotative option.
Apply to Dimensions: Ensure that all dimensions in your drawing use this annotative dimension style.
Set Annotation Scale: Set the annotation scale for each viewport so that the dimensions scale correctly in each one. Use the Properties palette to set the Annotation Scale for each viewport.
References:
* AutoCAD Help Documentation on Using Annotative Dimensions
NEW QUESTION # 18
You are modifying an AutoCAD drawing for a customer.
You would like to bring your customers attention to a specific area of the drawing that you modified for review.
Which type of object is conventionally used?
- A. A revision cloud
- B. A solid hatch
- C. A viewport
- D. A construction line
Answer: A
Explanation:
The type of object that is conventionally used for this purpose is D. A revision cloud123. A revision cloud is a way to highlight changes or revisions in a drawing by creating a cloud-shaped polyline around them12. You can create a revision cloud by moving the mouse or by converting existing objects2. You can also change the style, color, layer and properties of the revision cloud13.
NEW QUESTION # 19
Refer to exhibit.
A CAN designer is creating a tour-lane running track the outside lane is a polyline on the Track layer. The inside are to be placed on the current layer LANES.
Wlik.li options should the designer use with the OFFSET command at an offset distance of 10 to create the ruining track?
- A. Select the Through option and Multiple
- B. Select the Layer option/Current with a distance of 10 and Multiple
- C. Select the Through option with a distance of 10 and Multiple
- D. Select the Layer option/Source with a distance of 10 and Multiple.
Answer: B
Explanation:
To create multiple parallel lines (lanes) for a running track using the OFFSET command in AutoCAD, and to ensure they are placed on the current layer (LANES), follow these steps:
* Initiate the OFFSET command:
* Type OFFSET in the command line and press Enter.
* Set the offset distance:
* When prompted for the offset distance, type 10 and press Enter.
* Use the Layer option:
* To place the offset lines on the current layer, type L for Layer and press Enter.
* Select Current to ensure the new offset lines are created on the current layer (LANES).
* Select the Multiple option:
* To create multiple offsets at the same distance, type M for Multiple and press Enter.
* Create the offsets:
* Select the polyline (outside lane) as the object to offset.
* Click to the side where the offsets are to be created (inside of the original polyline).
* Repeat the clicks to create the necessary number of lanes.
This method ensures that each new lane is created at a consistent distance of 10 units from the previous one and that all new lanes are placed on the current layer.
NEW QUESTION # 20
Refer to the exhibit.
The exhibit shows a set of ornamental garden stairs going up to a walkway as part of a landscaping design.
You need to make sure that the edge of the top step in shown in a different linetype, as shown by the dashed line in the exhibit.
Which prompt in the OFFSET command should you use?
- A. Through
- B. Current
- C. Erase
- D. Source
Answer: B
Explanation:
The Current prompt should be used to make sure that the edge of the top step is shown in a different linetype, as shown by the dashed line in the exhibit. This way, you can set a different linetype for your current layer before using the OFFSET command4.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2021/ENU/AutoCAD
NEW QUESTION # 21
You are using the UCS command to set the user coordinate system (UCS)
Select whether each statement is True or False.
Answer:
Explanation:
Explanation
* TrueAccording to 1 and 2, UCS is a command that sets the user coordinate system (UCS) which establishes the XY work plane and Z-axis direction for drawing and modeling.
Based on 1, you can use the View option to align the UCS with the current view orientation. This option rotates the UCS so that it matches your current view of a 3D model.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2016/ENU/AutoCAD
* Falseccording to 1 and 2, UCS is a command that sets the user coordinate system (UCS) which establishes the XY work plane and Z-axis direction for drawing and modeling.
Based on 1, you can use the World option to set the UCS back to its default orientation. This option resets the UCS so that it matches the WCS (world coordinate system).
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2016/ENU/AutoCAD
* TrueAccording to 1 and 2, UCS is a command that sets the user coordinate system (UCS) which establishes the XY work plane and Z-axis direction for drawing and modeling.
Based on 1, you can use the Named option to save or restore named UCS definitions. This option allows you to create custom UCSs and switch between them easily.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2016/ENU/AutoCAD
NEW QUESTION # 22
The Audit (AUDIT) command is used often on a project
How should the user interface be customized to display the Audit tool continuously? [Note Mac terminology appears in the parentheses 1
- A. Add the tool to the status bar
- B. Pin the Modify panel open
- C. Add the tool to the Quick Access Toolbar (Toolbar).
- D. Create a now shortcut key for the AUDI I command.
Answer: C
Explanation:
Open Customize User Interface (CUI): Type CUI in the command line and press Enter.
Locate the AUDIT Command: In the CUI dialog box, under the Customize tab, expand the Ribbon node and then expand the Panels node.
Add to Quick Access Toolbar: Drag the AUDIT command from the Panels list and drop it onto the Quick Access Toolbar in the Customize list.
Save Changes: Click Apply and OK to save the changes. The AUDIT tool will now be available in the Quick Access Toolbar for continuous display.
References:
* AutoCAD Help Documentation on Customizing the Quick Access Toolbar
NEW QUESTION # 23
In model space (MODEL), a room label text height is set to 300 mm in the designated text style.
Which viewport scale should you apply to a layout viewport (PAPER) so that the room label text height will display as 3 mm when plotting the drawing?
- A. 100:1
- B. 1:1
- C. 1:100
- D. A custom viewport scale
Answer: A
Explanation:
Explanation
the formula for determining object scaling is:
Object Height x Annotation Scale x Annotation Plot Size = Model Space or Paper Space Height In this case, we want the room label text height to be 3 mm in paper space when plotting the drawing.
Assuming an annotation plot size of 1 mm and an object height of 300 mm, we can solve for the annotation scale as follows:
300 x Annotation Scale x 1 = 3 Annotation Scale = 3 / 300 Annotation Scale = 0.01 Therefore, the viewport scale that corresponds to this annotation scale is B. 100:1.
https://knowledge.autodesk.com/support/autocad-architecture/learn-explore/caas/CloudHelp/cloudhelp/2016/EN
NEW QUESTION # 24
You need to snap to the centroid of a closed polyline.
Which Object Snap mode should you use? Click the correct option in the answer area.
Note: Exhibit shown is the AutoCAD interface in Windows. While the AutoCAD for MAc version differs in appearance, the correct answer correlates in the options.
Answer:
Explanation:
Explanation:
object snaps are modes that allow you to snap to specific points on objects. To snap to the centroid of a closed polyline, you should use the Geometric Center object snap mode. This mode will display an asterisk (*) marker when you move the cursor over the geometric center of a closed polyline or spline.
To use this mode, you can either:
* Click on the Object Snap icon in the Status bar and select Geometric Center from the menu.
* Type GCE at the command prompt or when prompted for a point and press Enter.
Now you can snap to the centroid of a closed polyline by using Geometric Center object snap.
NEW QUESTION # 25
Exhibit.
The exhibit shows the drawing scales available in the current drawing.
The drawing units Length type is set to decimal.
A CAD designer needs to add a 1" = 120' drawing scale.
Which drawing and paper units should be entered in the Add Scale dialog to create the required drawing scale?
- A. Drawing units to 960 and paper units to 120.
- B. Drawing units to 120 and paper units to 15
- C. Drawing unite to 1 and paper units to 120
- D. Drawing units to 120 and paper units to 1.
Answer: C
Explanation:
* Access the Add Scale Dialog:
* Open the 'Edit Drawing Scales' dialog by clicking on the scale list in the status bar or through the SCALELISTEDIT command.
* Add a New Scale:
* Click on the Add button to open the 'Add Scale' dialog.
* In the 'Add Scale' dialog, you will need to specify the drawing units and paper units for the new scale.
* Enter the Required Scale Values:
* For a scale of 1" = 120', set the Drawing Units to 1 and the Paper Units to 120.
* This configuration means that 1 unit in the drawing will represent 120 units on paper, matching the desired scale.
* Save the New Scale:
* Click OK to save the new scale to the scale list.
* The new scale of 1" = 120' will now be available for use in the drawing.
References:
* AutoCAD Documentation on adding scales: Adding Scales
NEW QUESTION # 26
Move three applicable xref options from the list on the left to the corresponding functions on the right Xref options may be used once or not at all. (Select 3)
Answer:
Explanation:
Explanation:
Removes the xref drawing from the host drawing permanently and erases all instances of the xref drawing. = Detach
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/AutoCAD Retrieves the xref drawing and displays the most recently saved version of the drawing. = Reload
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/AutoCAD Converts the xref drawing into a block, making the drawing a permanent part of the host drawing. = Bind
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/AutoCAD
NEW QUESTION # 27
What should be typed at the command line in order to start creating a line for drawing reference that starts at a defined point and extends to infinity in the designated direction?
- A. RAY
- B. MLINE
- C. CURSORSIZE
- D. XLINE
Answer: D
Explanation:
Explanation
According to the AutoCAD for Design and Drafting documents1, the command that should be typed at the command line in order to start creating a line for drawing reference that starts at a defined point and extends to infinity in the designated direction is XLINE2. This command creates a construction line, which is a type of reference line that can help you manage accurate parameters of your drawing2. You can also use point objects as nodes or reference geometry for object snaps and relative offsets3.
NEW QUESTION # 28
......
Get instant access of 100% real exam questions with verified answers: https://www.exam4free.com/ACP-01101-valid-dumps.html
ACP-01101 Actual Questions - Instant Download Tests Free Updated Today!: https://drive.google.com/open?id=1jQclvEhw66fNzNpirAHXsw7pkJ5_8CNk
