Download Online VALID 300-635 Exam Dumps File Instantly[Dec 11, 2024]
300-635 Exam Dumps For Certification Exam Preparation
To prepare for the Cisco 300-635 exam, candidates can take official training courses offered by Cisco or use study materials such as books, videos, and practice exams. They can also join online communities and forums where they can interact with other professionals and learn from their experiences. Passing 300-635 exam can open up new career opportunities for professionals in the field of data center automation and help them stay relevant in a rapidly evolving industry.
NEW QUESTION # 16
Which two bootstrap technologies are supported by Cisco NX-OS platforms? (Choose two )
- A. iPXE
- B. PNP
- C. BOOTP
- D. POAP
- E. DHCP
Answer: C,E
NEW QUESTION # 17
Refer to the Exhibi:
Refer to the exhibit: The script is called deltacounters.py and it is currently inside a Guest Shell container running inside a Cisco NX-OS switch.
Which Cisco NX-OS command results in a successful execution of this script?
- A. guestshell execute python /home/admin/deltacounter.py ethernet1/1
- B. python /home/admjn/bootflash;deltacounters.py ethernet1/1
- C. show python bootf1ash:deltacounters.py ethernet1/1
- D. guestshell run python /home/admin/deltacounter.py ethernet1/1
Answer: C
NEW QUESTION # 18
Which statement is true if password-strength checking is enabled?
- A. The strength of existing passwords will be checked.
- B. Passwords become case-sensitive.
- C. Short, easy-to-decipher passwords will be rejected.
- D. Special characters, such as the dollar sign ($) or the percent sign (%), will not be allowed.
Answer: C
Explanation:
If a password is trivial (such as a short, easy-to-decipher password), the cisco NX_OS software will reject your password configuration if password-strength checking is enabled. Be sure to configure a strong password.
Passwords are case sensitive.
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/security/configuration/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX- OS_Security_Configuration_Guide_7x_chapter_01000.pdf
NEW QUESTION # 19
How should the Kubernetes manifests be modified to allow Kubernetes environment integration with Cisco ACI?
- A. No change is needed to perform this action.
- B. The metadata section must contain the Cisco APIC management IP
- C. The manifest does not have to be changed, but the Kubemetes object is not discovered by Cisco ACI if this is not defined in the manifest
- D. The manifests must include ACI EPG reference
Answer: A
NEW QUESTION # 20
A server profile with the "WEST15" in its name must have the string "WEST15" changed to "LXT14". For example, server profile "Vmhost-west 15-01" would need to be changed to "VMHOST-LXT 14-01". Using the Cisco Intersight REST API in a Python script, which two GET API requests are used to retrieve just the server profile with the string "WEST 15" in the name and the correct body for the API request to update the name? Assume the variable "sp_name" contains the name of the retrieved server profile. (Choose two.)
- A. GET https://intersight.com/api/v1/server/Profiles?$select=Namefilter=contains (Name,'WEST15')
- B. BODY = {" Name": sp_name.replace('WEST15','LXT14')}
- C. GET https://intersight.com/api/v1/server/Profiles?$select=Name&$filter=startswith(Name, 'WEST15')
- D. GET https://intersight.com/api/v1/server/Profiles?$select=Name&filter=Name in ('WEST15')
- E. BODY = {"Name": sp_name.format('WEST15,'LXT14')}
Answer: B,D
NEW QUESTION # 21
What can be identified by running the show install all impact kickstart bootflash:n5000-uk9- kickstart.7.0.7.N.1.1.bin system bootflash:n5000-uk9.7.0.7.N1.1a.bin command?
- A. whether the specified system image supports the kickstart image
- B. whether bootflash is supported for the specified Cisco NX-OS images
- C. whether ISSU is supported for the specified Cisco NX-OS images
- D. whether the specified kickstart image is compatible with the start-up config
Answer: C
NEW QUESTION # 22
Refer to the exhibit.
The code should create a new tenant named Cisco via the Cobra SDK, which shows up after the execution of this script in the APIC dashboard.
Which code must he inserted into the red box to create this tenant?
- A. fvTenant = Tenant('Cisco')
- B. tenant = Tenant(topMo. name='Cisco')
- C. fvTenant = NewTenant(name='Cisco')
- D. fvTenant = Tenant(topMo, name='Cisco')
Answer: D
Explanation:
Section: Controller Based Data Center Networking
NEW QUESTION # 23
Refer to the exhibit.
Refer to the exhibit:
Which change allows the code to configure VLAN 10 in the Cisco UCS?
- A. Lines 8 and 9 should have a line continuation \ at the end
- B. Line 13 should include "handle.commit()"
- C. Line 3 should add an import for query_dn
- D. Line 4 should include transport 443 option
Answer: B
NEW QUESTION # 24
Refer to the exhibit.
Refer to the exhibit. How often is the subscription stream for sys/bgp going to be sent?
- A. 5 sec
- B. 5 min
- C. 5 msec
- D. 5000 sec
Answer: A
NEW QUESTION # 25
Which statement about SNMP support on Cisco Nexus switches is true?
- A. Cisco NX-OS only supports SNMP over IPv4.
- B. SNMP is not VRF-aware.
- C. Only users belonging to the network operator RBAC role can assign SNMP groups.
- D. SNMP requires the LAN_ENTERPRISE_SERVICES_PKG license.
- E. Cisco NX-OS supports one instance of the SNMP per VDC.
Answer: E
NEW QUESTION # 26
Refer to the exhibit.
Refer to the exhibit. How often is the subscription stream for sys/bgp going to be sent?
- A. 5 sec
- B. 5 min
- C. 5 msec
- D. 5000 sec
Answer: A
Explanation:
The subscription stream for sys/bgp is set to be sent every 5000 milliseconds, as indicated by the configuration line switch(config-tm-sub)# snsr-grp 100 sample-interval 5000. Since there are 1000 milliseconds in a second, a sample interval of 5000 milliseconds equates to a frequency of every 5 seconds. References: Cisco Nexus
9000 Series NX-OS System Management Configuration Guide
NEW QUESTION # 27
Refer to the exhibit.
The script is called deltacounters.py and it is currently inside a Guest Shell container running inside a Cisco NX-OS switch.
Which Cisco NX-OS command results in a successful execution of this script?
- A. guestshell execute python /home/admin/deltacounter.py ethernet1/1
- B. guestshell run python /home/admin/deltacounter.py ethernet1/1
- C. show python bootflash:deltacounters.py ethernet1/1
- D. python /home/admin/bootflash:deltacounters.py ethemet1/1
Answer: B
NEW QUESTION # 28
Refer to the exhibit.
Which action fixes the code to access a child managed object?
- A. Change parent to children in line 2.
- B. Delete line 2.
- C. Change dnQuery to classQuery in line 1.
- D. Move line 2 to the last line.
Answer: A
NEW QUESTION # 29
Refer to the exhibit:
Refer to the exhibit: Which Python snippets create an application policy named OrderProcess that contains two application endpoint groups under Tenant SuperEats using direct calls to the ACI REST API? Assume that authentication and library imports are correct
- A. Option
- B. Option
- C. Option
- D. Option
Answer: C
NEW QUESTION # 30
Which two terms are types of application isolation options available when Kubenetes is deployed with the SCCM plugin? (Choose two )
- A. Server Isolation
- B. Cluster Isolation
- C. Namespace Isolation
- D. VM Isolation
- E. Process Isolation
Answer: B,C
Explanation:
Explanation
Reference : https://cloud.google.com/kubernetes-engine/docs/concepts/multitenancy-overview
NEW QUESTION # 31
What is the default data encoding for the response output of the ACI APIC API inspector?
- A. XML
- B. csv
- C. JSON
- D. YAML
Answer: C
Explanation:
The default data encoding for the response output of the ACI APIC API inspector is JSON (JavaScript Object Notation). JSON is a lightweight data-interchange format that is easy for humans to read and write and easy for machines to parse and generate. References: Cisco ACI documentation and API guides.
NEW QUESTION # 32
Drag and drop the items to complete the request to retrieve the current firmware of Cisco UCS devices from the Cisco Intersight API. Not all items are used.
Answer:
Explanation:
Explanation:
GET, firmware, RunningFirmwares
NEW QUESTION # 33
Drag and drop the correct YAML components from the bottom onto the correct blanks within the Ansible playbook to create a new application profile called "DbApp" using the Ansible ACI module. Not all options are used.
Answer:
Explanation:
Explanation
aci_ap
Tenant: MyCompany
ap: DbApp
state: present
NEW QUESTION # 34
How should the Kubemetesmanrfests be modified to allow Kubernetes environment integration wrth Cisco ACI?
- A. The manifest does not have to be changed, but the Kubemetes object is not discovered by Cisco ACI if this is not defined in the manifest
- B. The manifests must include ACI EPG reference
- C. No change is needed to perform this action.
- D. The metadata section must contain the Cisco APIC management IP
Answer: D
NEW QUESTION # 35
What is a description of a Cisco UCS Director script module?
- A. function to convert internal workflow tasks into Python scripts
- B. place to store imported scripts, Bash, and custom Python code for use in custom workflow tasks
- C. place to store custom workflow scripts, jars, and custom lists of values for use in custom workflow tasks
- D. place to store external scripts that are not related to Cisco UCS Director
Answer: C
NEW QUESTION # 36
......
Cisco 300-635 (Automating Cisco Data Center Solutions) exam is designed to test the knowledge and skills of IT professionals who are interested in automating Cisco data center solutions. 300-635 exam is part of the Cisco Certified DevNet Professional certification track and is ideal for individuals who have experience in designing, deploying, and managing Cisco data center infrastructure.
Latest Verified & Correct 300-635 Questions: https://www.exam4free.com/300-635-valid-dumps.html
