Master 2023 Latest The Questions SAP Certified Application Associate and Pass C_DS_42 Real Exam!
Penetration testers simulate C_DS_42 exam PDF
SAP Data Integration with SAP Data Services Certification Exam Details:
| Sample Questions | SAP Data Integration with SAP Data Services Certification Sample Questions |
| Exam Code | C_DS_42 |
| Duration | 180 mins |
| Reference Books | DS10 (DATA SERVICES 4.2 SP8) DS100 (DATA SERVICES 4.2 SP10) Additional Information Designer Guide (Tech.Manuals) ETL Project Guidelines Realtime at a Glance Delta Load Implementation |
| Exam Name | SAP Certified Application Associate - Data Integration with SAP Data Services 4.2 |
| Level | Associate |
| Schedule Exam | SAP Training |
| Exam Price | $560 (USD) |
SAP C_DS_42 Exam Description:
The "SAP Certified Application Associate - Data Integration with SAP Data Services 4.2" certification exam verifies that the candidate possesses proven skills and fundamental knowledge in implementing ETL projects, administering and managing projects using SAP Data Services. This exam will measure the candidate's knowledge of SAP DataServices starting with understanding Data Integration concepts, and will test required skills in applying performance tuning and sizing methods, implementing complex design methodology, performing Data Transformation and troubleshooting and recovery.
NEW QUESTION 19
In SAP data services what does the data generation transform allow you to generate?
- A. the valid from date based on a dataset the contains valid to information only
- B. the valid to date based on a dataset the contains valid to information only
- C. The current date for a column to see when each row was loaded.
- D. The rows for a given data range
Answer: D
NEW QUESTION 20
You want to use on SAP data services transform to split your source vendor data into three branches, based on the country code.
Which transform do you use?
- A. Map_Operation transform
- B. Country ID transform
- C. Validation transform
- D. Case transform
Answer: D
NEW QUESTION 21
During development of a SAP Data Services dataflow, you find that the source system contains data inconsistencies.
What transform allows you to define rules and monitor the conformance of the data for every load?
- A. Validation transform
- B. SQL transform
- C. Query transform
- D. Case transform
Answer: A
NEW QUESTION 22
By which application you do Analyze the end-to-end impact and lineage for source and target objects used within the Data Services local repository?
- A. Administrator
- B. Impact and Lineage Analysis
- C. Data Quality Reports
- D. Data Validation Dashboard
- E. Operational Dashboard
- F. Auto Documentation
Answer: B
NEW QUESTION 23
Which of the following administrative tasks can you perform using the SAP Data Services Management Console?
- A. edit the system configuration
- B. Schedule a batch job
- C. Configure an adapter
- D. Edit the initialization script of a job
Answer: D
NEW QUESTION 24
You are working as an ETL developer using SAP Data Services Designer. To whom You will create Datastores?
- A. For the source
- B. None of the above
- C. For the staging databases
- D. For the Target
Answer: A,C,D
NEW QUESTION 25
You define audit rules for critical data flow to confirm that you SAP Data Services batch job loaded only correct data. Which audit functions are available to define these rules for columns? Note: There are 3 correct answers
- A. sum
- B. Min
- C. Checksum
- D. Count distinct
- E. Average
Answer: A
NEW QUESTION 26
You must calculate the total value of all orders, including their discounts, for reporting purposes. Currently these details are found in different tables.
Use the sum function to calculate the total value of orders in the Order_Details table.
How to Now that the expression can calculate the total of the order values, make it possible for the Query to begin at the first order through the end of the records in the table by using the Group By tab.
- A. On the Mapping tab of the TOTAL_VALUE column, enter the expression:
- B. Close the Editor.
- C. In the Schema In column, select the ORDERID field from the ORDER_DETAILS table and drag it to the Group By tab.
- D. In the Query Editor , select the Group By tab.
Answer: B,C,D
NEW QUESTION 27
Which features are supported by the SAP Data Services interactive debugger?
3 correct answers
- A. Show performance-related statistics
- B. Show the optimized execution plan
- C. Show sample rows of each step
- D. Define additional filters
- E. Set breakpoint
Answer: C,D,E
NEW QUESTION 28
Contains repository names associated with the Job Server on which you run_______?
- A. Profiler
- B. Batch
- C. Real-Time
- D. Adapters
Answer: A
NEW QUESTION 29
In which parameter the number of minutes a profiling task can be inactive before the Data Profiler cancels it?
- A. Inactive interval (minutes)
- B. Invoke sleep interval (seconds)
- C. Active Interval (Seconds)
- D. Submit sleep interval (seconds)
Answer: A
NEW QUESTION 30
Which connection does Management Console use to repositories?
- A. JDNC Connection
- B. JDBC connection
- C. Server Connection
- D. Internet Connection
Answer: B
NEW QUESTION 31
You must ensure that all records from the Customer table in the Alpha database are being moved to the Delta staging database using the audit logs.
In the Local Object Library, replicate the Alpha_NACustomer_DF data flow.
Name the replicated data flow Alpha_AuditCustomer_DF . Add the replicated data flow to a new job, Alpha_AuditCustomer_Job . Set up auditing on the data flow Alpha_AuditCustomer_DF by adding an audit rule to compare the total number of records in the source and target tables.
How to Enable auditing for the execution of the Alpha_AuditCustomer_Job .
- A. Right-click the Alpha_AuditCustomer_Job .
- B. Choose Execute .
- C. Under Action on failure, select the Raise exception checkbox.
- D. Choose the Trace tab and choose Trace Audit Data .
- E. In the Execution Properties dialog box, choose the Execution Options tab, and select the Enable auditing checkbox.
Answer: A,B,D,E
NEW QUESTION 32
What task can you perform in the SAP Data Services Management Console? Note: There are 3 correct answers to this question
- A. Debug a dataflow to find data issues
- B. Display the optional Validation Transform statistics
- C. Display trace and monitor and error logs.
- D. View the rows and the values being loaded
- E. Schedule a job for daily execution
Answer: B
NEW QUESTION 33
In the transform editor for the Query transform, How to map all columns from the Schema In to the Schema Out?
- A. Drag all columns to the Schema Out
- B. To select all columns in the Schema In , choose the CUSTOMERID column, hold the shift key, and choose the PHONE column
- C. To open the Query Editor , in the data flow workspace, double click the Query transform
- D. In the Query editor, choose the WHERE tab.
Answer: A,B,C
NEW QUESTION 34
In SAP Data Services you have a Validation Transform with the following two rules Rule #1: Action on Failure is 'Send to Pas' Rules#2: Action on Failure is 'Send to Fail.
Where are the records that fail both rule #1 and rule #2 sent?
- A. Only to the Fail output
- B. Only to the Pass output
- C. Only to the Rule Violation output
- D. To both the Pass and Fail output
Answer: A
NEW QUESTION 35
The value of the DEPT ID is null
What is the output of this SAP Data Services function?
- A. ?
- B. IS
- C. null
- D. CA
Answer: A
NEW QUESTION 36
An SAP Data Services job contains a lot of dataflows and runs for several hours every night. If a job execution fails, you want to skip all successful dataflows and start with the failed dataflow. How do you accomplish this?
There are 2 correct answer
- A. add a try block before each dataflow and a Catch block after each dataflow
- B. Merge the dataflows from the job and rerun it.
- C. Design the dataflow to ensure a second run does not result in duplicate
- D. Run the nightly job with the enable recovery flag turned on.
Answer: A,C
NEW QUESTION 37
You are designing an SAP Data Services process.
This process must execute ONLY if a defined expression is true.
Which object allows you to accomplish this task?
- A. Try/catch block
- B. Validation transform
- C. Conditional
- D. Case transform
Answer: C
NEW QUESTION 38
A new developer joined the project team. You already created a new SAP Data Services repository for this member.
Where do you manage the security setting for this new repository?
- A. Repository manager
- B. Repository database
- C. Central Management console
- D. Data Services Designer
Answer: C
NEW QUESTION 39
Contains repository names that are associated with the Job Server on which you run your jobs. Which is the actual option to see jobs status?
- A. Real-Time
- B. Profiler
- C. Batch
- D. Adapters
Answer: C
NEW QUESTION 40
You must calculate the total value of all orders, including their discounts, for reporting purposes.
Currently these details are found in different tables.
Use the sum function to calculate the total value of orders in the Order_Details table.
How to Execute the Alpha_Order_Sum_Job with the default execution properties after saving all of the objects that you have created.
- A. In the Query Editor , select the Group By tab.
- B. Choose Execute .
- C. In the Omega project, right click the Alpha_Order_Sum_Job .
- D. To use the default execution properties, choose OK .
Answer: B,C,D
NEW QUESTION 41
You modified an existing SAP data Services job. You notice that the run time is now longer then expected. Where in SAP Data Services can you observe the progress of row counts to determine the location of a bottleneck
- A. In the impact and lineage analysis
- B. On the view data tab
- C. In the monitor log
- D. In the trace log
Answer: C
NEW QUESTION 42
You must ensure that all records from the Customer table in the Alpha database are being moved to the Delta staging database using the audit logs.
In the Local Object Library, replicate the Alpha_NACustomer_DF data flow. Name the replicated data flow Alpha_AuditCustomer_DF . Add the replicated data flow to a new job, Alpha_AuditCustomer_Job . Set up auditing on the data flow Alpha_AuditCustomer_DF by adding an audit rule to compare the total number of records in the source and target tables.
How to Modify the data flow to send customers outside North America to a second template table, Alpha_Other_customer .
- A. Name the new template table Alpha_Other_customer .
- B. Choose OK .
- C. Choose Execute .
- D. Create the table in datastore Delta .
- E. In the Execution Properties dialog box, choose the Execution Options tab, and select the Enable auditing checkbox.
- F. Click in the data flow workspace to add a new template table below the Alpha_NA_customer target table.
- G. Add a second Query transform to the data flow
Answer: A,B,D,F,G
NEW QUESTION 43
An SAP Data Services dataflow adds the changed data (insert and update) into a target table every day.
How do you design the dataflow to ensure that a partially executed dataflow recovers automatically the next time it is executed?
2 correct answers
- A. Use the table comparison transform before the table loader
- B. Add lookup function in the where clause to filter out existing rows.
- C. Set the autocorrect load option in the target table loader option
- D. Enable the Delete data before load target table loader option
Answer: A,B
NEW QUESTION 44
......
Penetration testers simulate C_DS_42 exam: https://www.exam4free.com/C_DS_42-valid-dumps.html
Bestselling On-The-Job Reference Exam Questions: https://drive.google.com/open?id=1tupakxW7EJ51EtZoVB-pqr0B6YUEpgD8
