OmniStudio-Developer Certification Exam Dumps Questions in here [Jun-2024]
Updated OmniStudio-Developer Exam Practice Test Questions
Salesforce OmniStudio is a comprehensive platform that enables businesses to create and manage customized applications and workflows. The platform includes a range of tools and services such as data integration, process automation, and user interface design. The OmniStudio-Developer certification is an essential requirement for professionals who work with the platform and want to prove their expertise.
Salesforce OmniStudio-Developer certification exam consists of 60 multiple-choice questions, and candidates have 90 minutes to complete it. OmniStudio-Developer exam covers a range of topics, including OmniStudio architecture, data modeling, security, and development best practices. To pass the exam, candidates must score at least 65%, and they must demonstrate a thorough understanding of OmniStudio's capabilities, as well as their ability to develop solutions that meet business requirements. Obtaining this certification is an excellent way for developers to showcase their expertise in developing solutions using Salesforce's low-code development platform and to enhance their career opportunities in the Salesforce ecosystem.
Earning the Salesforce OmniStudio-Developer certification is a great way to demonstrate your expertise and stand out in a competitive job market. Employers are always looking for skilled developers who can deliver innovative solutions that drive business results, and this certification can help you prove that you have what it takes to succeed in today's fast-paced digital economy.
NEW QUESTION # 30
Refer to the exhibit below. A developer has configured an integration Procedure element with Additional input.
Alternatively, how could the developer configure SEND/RESPONSE TRNSFORMATION to send exactly the same data? Assume the developer has un-checked Send Only Additional input.
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 31
Refer to the exhibit below. What is the merge code needed for this Integration Procedure structure to pass a CaseData node from the HTTP Action's output to the DataRaptor Transform Action?
- A. {{ HTTPGetCaseDetails:CaseData}}
- B. %HTTPGetDetails:CaseData%
- C. %DRXformCaseData: CaseData%
- D. {{CaseData}}
Answer: C
NEW QUESTION # 32
A developer needs to display the following information together on one FlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number, email
The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?
- A. Use a conditional FlexCard State
- B. Set the collapsible property on the block element
- C. Set the class'' collapsible'' on the block element
- D. Use a Datatable element
Answer: B
NEW QUESTION # 33
A developer creates a Flexcardthat displaysa contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
- A. {Records.postalcode}
- B. {Postalcode}
- C. {Parent.postalcode}
- D. {Params.postalcode}
Answer: D
Explanation:
The Params node contains the data that is passed from the parent FlexCard to the child FlexCard. The developer should use {Params.postalcode} to refer to the contact's postal code in the child FlexCard.
NEW QUESTION # 34
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, the developer enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?
- A. The DataRaptor Action did not have the add response Ro Response JSON property set to true.
- B. The AccountId used for the preview is invalid.
- C. A Response Action was not added to the integration Procedure.
- D. The Response cannot be previewed directly.
Answer: C
NEW QUESTION # 35
Refer to the exhibit below. A developer has configured an integration Procedure element with Additional input.
Alternatively, how could the developer configure SEND/RESPONSE TRNSFORMATION to send exactly the same data? Assume the developer has un-checked Send Only Additional input.
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Explanation
The Send JSON Path syntax for accessing an element from an Integration Procedure structure is BlockName.ElementName. In this case, the BlockName is BlockX and the ElementName is ActionZ. The colon (:) is used to separate the input and output parameters, not the block and element names. The order of the block and element names should follow the hierarchy of the structure, from top to bottom. The Additional input parameter is not needed in this case, as it is already included in the Send JSON Path.
NEW QUESTION # 36
A developer needs to retrieve data from an external system that stores policy data. The external system supports REST APIs to access and update the policies. Due to the volume of the policy data and peak hours of hours of business, calls to the REST APIs sometimes take longer than expected to response.
The developer creates an Integration Procedure to retrieve the policy data for use in an OmniScript.
Given the external system'sknownperformance issues, which configuration should be used to implement the call to the external system?
Choose 2 answers
- A. Configure a Remote action with timeout settings of 120000
- B. Check the Chainable checkbox on the integration procedure Action in the OmniScript
- C. Set the Timeout property on the HTTP Action in the Integration Procedure
- D. Check the Chain on Step Check on the HTTP Action in the Integration Procedure
Answer: C,D
Explanation:
Explanation
Setting the Timeout property on the HTTP Action in the Integration Procedure allows the developer to specify how long to wait for a response from the external system before timing out. Checking the Chain on Step Check on the HTTP Action in the Integration Procedure allows the developer to chain multiple HTTP Actions together and execute them sequentially. Configuring a Remote action with timeout settings of 120000 is not necessary, as it is already done by default in OmniStudio. Checking the Chainable checkbox on the integration procedure Action in the OmniScript has no effect on calling an external system.
NEW QUESTION # 37
A developer is building a DataRaptor Load for an Integrate Procedure used in an OmniScript.
Based on best practices, how should the developer configure the Input JSON?
- A. Copy the Input JSON from the OmniScript {Data} modal.
- B. Build the Input JSON node by node m the DataRaptor Designer.
- C. Build the Input JSON node by node m an editor.
- D. Copy the Input JSON from the DataRaptor Acton Debug node.
Answer: A
NEW QUESTION # 38
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, thedeveloper enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?
- A. The DataRaptor Action did not have the add response Ro Response JSON property set to true.
- B. The AccountId used for the preview is invalid.
- C. A Response Action was not added to the integration Procedure.
- D. The Response cannot be previewed directly.
Answer: C
Explanation:
Explanation
According to the OmniStudio Developer Guide, "To return a response from an Integration Procedure, add a Response action as the last action in your Integration Procedure." Therefore, the correct answer is C.
NEW QUESTION # 39
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developerconfigure the FlexCard to display the case records in this way?
- A. Enable the Repeat Records feature on the FlexCard Setup tab
- B. Disable the Repeat Record feature on the FlexCard setup tab
- C. Select the Repeatable Mode property on the data table elements
- D. Enable the record Looping feature on the data table elements
Answer: B
NEW QUESTION # 40
In an Integration Procedure, a developer needs to perform a multi-step calculation on every element of an array.
Based on best practices, what two methods are recommended?
Choose 2 answers
- A. Use a Decision Matrix Action to call a Decision Matrix.
- B. Use a List Action to merge the array elements together.
- C. Use a Set Values Element inside a Loop Block.
- D. Use an Expression Set Action to call an Expression Set.
Answer: C,D
NEW QUESTION # 41
In an OmniScript, what is unique about a Requirement in a Messaging element? Choose 2 answers
- A. It makes the banner yellow
- B. It requires a Validate Expression
- C. It is only availability for the false message
- D. It sets the element to required
Answer: A,B
NEW QUESTION # 42
Refer to the exhibit.
A developer has configured an integration Procedure element with SEND/RESPONSETRANFORMATIONS as shown.
Alternatively, how could the developer configure Additional input to send exactly the same data? Assume that the developer checked Send Only Additional input.
- A.
- B.
- C.
Answer: A
Explanation:
Option C is the correct way to configure Additional input to send exactly the same data as Input Data. The Additional input should have a key/value pair for each field in Input Data, and the value should be set to
{{InputData.field}} for each field. This will pass the value of Input Data for each field to Additional input.
NEW QUESTION # 43
What OmniStudio tool pre-populates the data m a PDF used by an OmniScript?
- A. A DataRaptor Load
- B. A SOQL Query
- C. A DataRaptor Extract
- D. A DataRaptor Transform
Answer: D
NEW QUESTION # 44
A developer creates a Flexcardthat displaysa contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
- A. {Records.postalcode}
- B. {Postalcode}
- C. {Parent.postalcode}
- D. {Params.postalcode}
Answer: D
Explanation:
Explanation
The Params node contains the data that is passed from the parent FlexCard to the child FlexCard. The developer should use {Params.postalcode} to refer to the contact's postal code in the child FlexCard.
NEW QUESTION # 45
A developer needs to configure a calculation procedure tocalculatethe sum of the entirebase price.
What is the mostefficient way for the developer to meet this requirement?
- A. Add an Aggregation Step as SUM (BasePrice)
- B. Add A Calculation Step as SUM (BasePrice).
- C. Create a Preprocessor class to calculate thesum
- D. Create a Postprocessor apex class to calculate the sum.
Answer: A
Explanation:
Explanation
he Aggregation Step in a calculation procedure allows the developer to perform aggregate functions such as SUM, COUNT, MIN, MAX, and AVG on the output of a previous step. The developer can use this step to calculate the sum of the entire base price by specifying the field name and the aggregation function
NEW QUESTION # 46
What should a developer's first step be when troubleshooting whether a DataRaptor Extract is retrieving data?
- A. Deactivate the card andlayout, andgo to the PREVIEW tab for the card to test.
- B. Go to the Lightning Console and reload the page to test.
- C. Go to the PREVIEW tab In OmniScript to test.
- D. Add a key/value pair in the DataRaptor to test it.
Answer: C
Explanation:
The PREVIEW tab in OmniScript allows the developer to test the DataRaptor Extract by providing a record ID and viewing the output data. This is a quick and easy way to troubleshoot whether the DataRaptor Extract is retrieving data correctly.
NEW QUESTION # 47
What pre-populates the data in a PDF used by an OmniScript?
- A. ASOGL Query
- B. ADataRaptor Load
- C. ADataRaptor Extract
- D. A DataRaptor Transform
Answer: D
NEW QUESTION # 48
A developer need to use the CONTIF function to process data entered by the user in an OmniScript. The output of the function needs to be displayed to the user immediately in the current step.
Based on best practice, what element should the developer use this function in?
- A. A Set Values element
- B. A formula element
- C. A Range element
- D. A Calculation Action element
Answer: B
NEW QUESTION # 49
In an Integration Procedure, a developer needs to perform a multi-step calculation on every element of an array.
Based on best practices, what two methods are recommended?
Choose 2 answers
- A. Use a Decision Matrix Action to call a Decision Matrix.
- B. Use a List Action to merge the array elements together.
- C. Use a Set Values Element inside a Loop Block.
- D. Use an Expression Set Action to call an Expression Set.
Answer: C,D
Explanation:
Explanation
A Set Values Element inside a Loop Block can be used to perform a calculation on each element of an array and store the result in a variable. An Expression Set Action can be used to call an Expression Set that contains one or more expressions to perform calculations on array elements. These two methods are recommended based on best practices for performing multi-step calculations on array elements.
NEW QUESTION # 50
A developerconfiguresa Flexcard with a DataRaptor data source that uses the params.id as an. When the developer clicks Views Data on the FlexCard, validdata displays. However, when the developer previews the layout, the FlexCard does not display. What could cause this error?
Choose 2 answers
- A. The attributehasn'tbeen configured to pass the data to the fields.
- B. There is not Salesforce record for the FlexCard based on the RecordId in the layout's Test Data Source Settings.
- C. The Data Node field for the FlexCard is empty.
- D. The RecordId in the Test Data Source settings ins for the wrong record type.
Answer: B,C
Explanation:
The Data Node field for the FlexCard is required to specify which data source will be used to populate the FlexCard. If it is empty, the FlexCard will not display any data. The Record Id in the Test Data Source settings is used to preview the layout with a specific record. If there is no Salesforce record for that Record Id, the FlexCard will not display any data either.
NEW QUESTION # 51
Refer to the exhibit.
A developer has configured an integration Procedure element with SEND/RESPONSE TRANFORMATIONS as shown.
Alternatively, how could the developer configure Additional input to send exactly the same data? Assume that the developer checked Send Only Additional input.
A)
B)
C)
- A. Option C
- B. Option B
- C. Option A
Answer: A
NEW QUESTION # 52
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developer configure the FlexCard to display the case records in this way?
- A. Enable the Repeat Records feature on the FlexCard Setup tab
- B. Disable the Repeat Record feature on the FlexCard setup tab
- C. Select the Repeatable Mode property on the data table elements
- D. Enable the record Looping feature on the data table elements
Answer: B
NEW QUESTION # 53
......
Verified OmniStudio-Developer dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump: https://drive.google.com/open?id=1_THvPALW3xhJUTx0gRcCIIYjlEOYtHXV
Pass Salesforce Developer OmniStudio-Developer Exam With 88 Questions: https://www.exam4free.com/OmniStudio-Developer-valid-dumps.html
