Real UiPath UiPath-ADAv1 Exam Dumps with Correct 256 Questions and Answers
Valid UiPath-ADAv1 Test Answers & UiPath UiPath-ADAv1 Exam PDF
NEW QUESTION # 141
In the context of the REFramework, if the OrchestratorQueueName key is present in both the Settings and Assets sheets, but an asset with the corresponding name is not present in Orchestrator, what will be the behavior at run time?
- A. An empty string will be saved for the "OrchestratorQueueName" key in the config dictionary.
- B. The flow will throw an exception in InitAllSettings workflow.
- C. The flow will use the value from the Settings sheets since the asset is missing.
- D. The "OrchestratorQueueName" key is not added to the config dictionary and the flow will throw in Get Transaction Data workflow.
Answer: C
Explanation:
The REFramework template is a robust and scalable framework for building RPA projects1. It uses a config file to store the settings and constants that are used throughout the project2. The config file has two sheets:
Settings and Assets. The Settings sheet contains the key-value pairs that are read by the InitAllSettings workflow and stored in the config dictionary. The Assets sheet contains the names of the assets that are stored in Orchestrator and need to be retrieved by the InitAllApplications workflow. The OrchestratorQueueName key is used to specify the name of the queue that is used to store the transaction items for the process. If the OrchestratorQueueName key is present in both the Settings and Assets sheets, but an asset with the corresponding name is not present in Orchestrator, the behavior at run time will be as follows:
The InitAllSettings workflow will read the value of the OrchestratorQueueName key from the Settings sheet and store it in the config dictionary.
The InitAllApplications workflow will try to retrieve the asset with the name OrchestratorQueueName from Orchestrator using the Get Asset activity. Since the asset does not exist, the activity will throw an exception.
The exception will be caught by a Try Catch block and handled by a Log Message activity with level Warning and message "Asset not found: OrchestratorQueueName".
The flow will continue with the next asset in the Assets sheet or move to the next state if there are no more assets.
The flow will use the value of the OrchestratorQueueName key from the config dictionary whenever it needs to access or update the queue.
Therefore, option B is correct. Option A is incorrect because the exception is thrown in InitAllApplications workflow, not InitAllSettings workflow. Option C is incorrect because an empty string is not saved for the OrchestratorQueueName key in the config dictionary. Option D is incorrect because the OrchestratorQueueName key is added to the config dictionary and the flow does not throw in Get Transaction Data workflow.
References:
How to Use Enhanced REFramework to Implement UiPath Projects article from UiPath Config.xlsx documentation from UiPath
[InitAllSettings.xaml] documentation from UiPath
[InitAllApplications.xaml] documentation from UiPath
[TransactionItem Variable] documentation from UiPath
NEW QUESTION # 142
Which argument name follows UiPath best practices for argument naming conventions?
- A. out_ConfirmationNumber
- B. ioUpdatedsum
- C. in_argument1
- D. dt_outputrovvs
Answer: A
Explanation:
The argument name that follows UiPath best practices for argument naming conventions is out_ConfirmationNumber. According to the UiPath best practices, the argument name should be meaningful and include an indication of its type and direction. The type can be inferred from the argument's data type, such as String, Int32, DataTable, etc. The direction can be one of the following: in, out, or io. The in direction means that the argument can only be used within the given project. The out direction means that the argument can be used to pass data outside of a given project. The io direction means that the argument can be used both within and outside of a given project4. The argument name should also follow the camel case convention, which specifies that each word in the middle of the argument name begins with a capital letter, with no intervening spaces or punctuation5. For example, the argument name out_ConfirmationNumber follows these best practices, as it indicates that the argument is of out direction, and that it stores a confirmation number value. The other argument names do not follow the best practices, as they either use incorrect or inconsistent prefixes, or do not use camel case convention. References: ST-NMG-002 - Arguments Naming Convention and Variables, arguments and workflows naming - best practice from UiPath documentation and forum.
NEW QUESTION # 143
A developer wants to assign the first row of the "ID" column in the "DT" datatable to a String variable. Which expression should be added to the Value field of the Assign activity?
- A. DTRows(0)ID
- B. DTRows(0). ltem("ID")
- C. DTColumns(0)ID
- D. DTColumns(0) ("ID")
Answer: B
Explanation:
To assign the first row of the "ID" column in the "DT" datatable to a String variable, the expression that should be added to the Value field of the Assign activity is:
DT.Rows(0).Item("ID")
This expression accesses the value of the "ID" column in the first row of the "DT" datatable using the Rows and Item properties. The Rows property returns a collection of DataRow objects that represent the rows in the datatable. The Item property returns or sets the value of the specified column in the DataRow object1. The expression uses the index 0 to refer to the first row in the Rows collection, and the column name "ID" to refer to the specific column in the Item property. The expression returns the value of the "ID" column in the first row as an Object type, which can be converted to a String type using the ToString method2. For example, if the "DT" datatable has the following values:
ID
Name
1
John
2
Mary
3
Bob
Then the expression DT.Rows(0).Item("ID") will return 1 as the value of the "ID" column in the first row.
References: DataTable.Rows Property and DataRow.Item Property from UiPath documentation.
NEW QUESTION # 144
A developer is building a process that types data into input fields using the Hardware Events input method.
Which property of the Type Into activity should be modified to reduce the pace at which the input string characters are typed into the fields?
- A. Delay after
- B. Delay between keys
- C. Alter disabled element
- D. Delay before
Answer: B
Explanation:
Explanation
The Delay between keys property of the Type Into activity specifies the time (in milliseconds) between each keystroke when using the Hardware Events input method. Increasing this value can slow down the typing speed and reduce the risk of missing or skipping characters. (UiPath Automation Developer study guide) References:
Type Into
Input Methods
NEW QUESTION # 145
A developer needs to take a screenshot of the state of the machine while the robot is running and then send the screenshot as an email. What is the correct sequence of steps that should be performed?
Instructions: Drag the Description found on the left and drop on the correct Step found on the right.
Answer:
Explanation:
Explanation
The correct sequence of steps that should be performed is:
Step 1 = Use a Take Screenshot activity to capture the state of the machine. The output is an Image variable, for example img_screenshot.
Step 2 = Use a Save Image activity to save the image to a local file. Supply the FileName (e.g.
screenshot.png) and the Image property should be the variable created in step 1.
Step 3 = Use a Send Outlook Mail Message activity to compose and send the email. Configure the Attachments property to include the file path of the image saved in step 2
Step 4 = Optionally, use a Delete File activity to delete the image file from the local drive after sending the email. Supply the Path property with the same file path as in step 3.
For more information on how to use these activities in UiPath Studio 2021 10, you can refer to these documents:
Take Screenshot
Save Image
Send Outlook Mail Message
Delete File
NEW QUESTION # 146
A developer used a dictionary to store employee ID numbers as the key with associated employee surnames as the value What is the benefit of using a dictionary?
- A. Dictionary keys and values can be of different data types
- B. Dictionaries can have repeated keys
- C. Dictionaries can be searched by keys or values
- D. Dictionaries must have unique values
Answer: A
Explanation:
The benefit of using a dictionary is that dictionary keys and values can be of different data types. A dictionary is a collection of key-value pairs, where each key is associated with a value. The key and the value can be of any data type, such as String, Integer, Boolean, Object, etc. This allows for more flexibility and versatility in storing and retrieving data3. For example, a dictionary can store employee ID numbers as the key with associated employee surnames as the value, where the key is of type Integer and the value is of type String. To access the value of a specific key, the syntax dictionaryName(key) can be used4. References: Dictionaries and How to use dictionary? from UiPath documentation and forum.
NEW QUESTION # 147
The provided exhibit displays the representation of the "Deadline" field using the yyyy-mm-dd format.
In what order should the Queue Items be processed by a single robot executing a Performer workflow?
Answer:
Explanation:
Explanation
The Queue Items should be processed by a single robot executing a Performer workflow in the following order:
EmployeeID1
EmployeeID4
EmployeeID8
EmployeeID3
EmployeeID6
EmployeeID9
EmployeeID5
EmployeeID2
EmployeeID7
A queue is a container that holds an unlimited number of items that can be processed by a robot1. A queue item can have a deadline and a priority, which affect the order in which the robot retrieves the items from the queue2. The Performer workflow is a part of the REFramework template that processes the queue items using the Get Transaction Item activity3. The order of queue execution is determined by the following rules4:
Items that have a deadline are processed first, in order of priority and according to the set deadline for items with the same priority.
Items that have no deadline are processed next, in order of priority and according to the rule First In, First Out for items with the same priority.
Based on these rules and the exhibit, the order of queue execution is as follows:
EmployeeID1 has the earliest deadline (2050-01-01) and high priority, so it is processed first.
EmployeeID4 has the same deadline as EmployeeID1, but normal priority, so it is processed second.
EmployeeID8 has the same deadline and priority as EmployeeID4, but it was added later to the queue, so it is processed third.
EmployeeID3 has the next earliest deadline (2050-01-02) and high priority, so it is processed fourth.
EmployeeID6 has the same deadline as EmployeeID3, but normal priority, so it is processed fifth.
EmployeeID9 has the same deadline and priority as EmployeeID6, but it was added later to the queue, so it is processed sixth.
EmployeeID5 has no deadline, but high priority, so it is processed seventh.
EmployeeID2 has no deadline and normal priority, so it is processed eighth.
EmployeeID7 has no deadline and low priority, so it is processed ninth.
References:
About Queues and Transactions documentation from UiPath
Processing Order documentation from UiPath
Performer documentation from UiPath
Order processing queue forum post from UiPath Community
NEW QUESTION # 148
When configuring the Max # of retries for the queue in Orchestrator to "1" for your process, and the queue has
5 transaction items. At runtime, the first transaction item throws a Business Rule Exception.
How does the process proceed?
- A. Transaction is not retried and the process stops.
- B. Transaction is retried only one time.
- C. Transaction is retried multiple times until processed successfully.
- D. Transaction is not retried but remaining transactions continue processing.
Answer: D
Explanation:
Explanation
When a transaction item throws a Business Rule Exception, it means that the item does not meet the business requirements and cannot be processed further1. Therefore, the transaction item is marked as failed and not retried, regardless of the Max # of retries setting for the queue2. However, the process does not stop and continues with the remaining transaction items in the queue3.
References:
Business Exception vs System Exception forum post, Answer by @loginerror RE Framework MaxRetryNumber and Orchestrator Queue Max # Rertry, again forum post, Answer by
@Arpit_Kesharwani
NEW QUESTION # 149
Which LINQ method is used to filter data in a List or Data Table based on a condition?
- A. Select
- B. GroupBy
- C. OrderBy
- D. Where
Answer: D
Explanation:
The Where method is used to filter data in a List or Data Table based on a condition. It returns a new collection that contains only the elements that satisfy the condition12. The other methods are used for different purposes: OrderBy for sorting, GroupBy for grouping, and Select for projecting3.
References:
Linq query to filter datatable forum post, Answer by @ppr
How to use LINQ on a DataTable in Uipath forum post, Answer by @Dave
How to use LINQ [Basic to Advanced] in UiPath event description, Introduction section
NEW QUESTION # 150
When creating a new test case, which option restricts dynamic data update in UiPath Orchestrator once the test case is published?
- A. File
- B. Data Service with Filter
- C. Test Data Queue
- D. Data Service
Answer: A
Explanation:
When creating a new test case in UiPath Orchestrator, you can choose a source for the test data that can be imported through arguments and used when running the test case1. The source can be one of the following options: None, Existing Data, File, Data Service, or Test Data Queue2. The option that restricts dynamic data update once the test case is published is File. This option allows you to upload a file (such as Excel or JSON) that contains the test data2. However, once the file is uploaded, you cannot modify or replace it without republishing the test case3. Therefore, the test data is static and cannot be updated dynamically. The other options allow dynamic data update in different ways. For example, Data Service allows you to use an existing table from Data Service as the test data source and filter it by using a SQL query2. You can update the table in Data Service and the changes will be reflected in the test case without republishing it4.
References: Test Cases documentation, New Test Case window description, Updating the test data sets forum post, Data Service documentation.
NEW QUESTION # 151
During the debugging process, a developer paused the execution. To alter the characteristics of the ongoing flow and change the values of variables within the existing scope.
which panel of the UiPath interface is recommended to be accessed?
- A. Variables Panel
- B. Information Window
- C. Execution Flow Panel
- D. Locals Panel
Answer: D
Explanation:
During debugging, when the execution is paused, the "Locals" panel in UiPath Studio is the place to go to alter the characteristics of the ongoing flow and change the values of variables within the existing scope. The Locals panel shows the current state of all variables and arguments in the current scope and allows their values to be changed on-the-fly.
References:
UiPath Studio Guide: Debugging
NEW QUESTION # 152
Consider the following Try Catch statement:
What will happen when the code is executed?
- A. The exception will be handled in the ArgumentException catch.
- B. The exception will be handled in the InvalidOperationException catch.
- C. There is no catch defined for the thrown exception type.
- D. The exception will be handled in the BusinessRuleException catch.
Answer: C
Explanation:
This is because the code is throwing a new IOException, but there is no catch block defined for IOException.
The catch blocks present are for BusinessRuleException, ArgumentException, and InvalidOperationException. Therefore, the code will not be able to handle the thrown exception. References:
https://docs.uipath.com/activities/docs/try-catch
NEW QUESTION # 153
What are the steps to publish a project from UiPath Studio?
Instructions: Drag the Description found on the "Left" and drop on the correct Step Sequence found on the
"Right".
Answer:
Explanation:
Explanation
A screenshot of a computer Description automatically generated
The steps to publish a project from UiPath Studio are:
In the Design ribbon tab, click on the "Publish" button. The Publish Project window opens. (UiPath Studio documentation1) Fill in the necessary publishing details, such as the project name, version, and description. You can also add release notes and select the environment where the project will run. (UiPath Studio documentation1) Choose the desired publishing option, such as Orchestrator, Local, or Custom NuGet feed. Depending on your choice, you may need to provide additional information, such as the Orchestrator URL, the local folder path, or the custom feed URL. (UiPath Studio documentation1) Click on the "Publish" button to initiate the publishing process. A confirmation message will appear when the project is successfully published. (UiPath Studio documentation1) Short Explanation: Publishing a project from UiPath Studio means creating a package that contains all the files and dependencies required to run the automation process. The package can be deployed to different locations, such as Orchestrator, a local machine, or a custom NuGet feed. Publishing a project from UiPath Studio involves four main steps: clicking on the Publish button, filling in the publishing details, choosing the publishing option, and confirming the publishing process. (UiPath Automation Developer study guide2) References:
1: Publishing Projects from Studio - UiPath Studio.
2: UiPath Certified Automation Developer - Learning Plan.
NEW QUESTION # 154
A developer has defined a variable named "CurrentDate" of type Date Time. Which of the following expressions can be used to show what hour was 12 hours prior to the date from the variable?
- A. Date Time.SubtractHours(CurrentDate, 12).Hour
- B. CurrentDate.AddHours(-12).Hour
- C. CurrentDate.SubtractHours(12).Hour
- D. Date Time.AddHours(CurrentDate, -12).Hour
Answer: B
NEW QUESTION # 155
What is the default URL of the OCR server that runs the Computer Vision service?
- A. https://cv.uipath.com/
- B. https://server.uipath.com/
- C. https://computervision.uipath.com/
- D. https://cvserver.uipath.com/
Answer: A
Explanation:
The default URL of the OCR server that runs the Computer Vision service is https://cv.uipath.com/. This is the endpoint of the UiPath Computer Vision Cloud service, which provides OCR capabilities for document understanding and UI automation1. The other options are not valid URLs for the OCR server.
References:
Document Understanding - UiPath.DocumentUnderstanding.OCR.LocalServer
Activities documentation, Introduction section
NEW QUESTION # 156
A developer is working on an automation using the REFramework. Each transaction item represents a piece of client information. For each customer, the automated procedure must click the
"Generate Shipment Details" button. This generates a table of shipment records for each customer.
What type of exception occurs when the data is not accessible, the created table displays only the header row, and processing for that client must be halted?
- A. NullReferenceException
- B. BusinessRuleException
- C. SystemException
- D. ApplicationException
Answer: B
Explanation:
Explanation
A BusinessRuleException occurs when a business rule is violated or a business requirement is not met during the execution of a process. In this case, the data is not accessible and the created table displays only the header row, which means that the expected output for the client is not generated. Therefore, processing for that client must be halted and a BusinessRuleException must be thrown. (UiPath Studio - Exception Handling - UiPath Academy) References:
Studio - Exception Handling - UiPath Documentation Portal
UiPath Studio - Exception Handling - UiPath Academy
REFramework in UiPath | Robotic Enterprise Framework - SOAIS
NEW QUESTION # 157
What role do Triggers play in the UiPath Integration Service?
- A. Manage connections between UiPath Studio and third-party applications.
- B. Provide a mechanism for subscribing to specific events from third-party applications, automatically starting processes in Orchestrator.
- C. Assist in the creation of automation projects by providing event-based activities.
- D. Provide a mechanism for starting processes on a scheduled basis from Orchestrator.
Answer: B
Explanation:
Explanation
Triggers are a feature of UiPath Integration Service that allow you to react to key events in third-party systems, such as data updates, insertions, deletions, or custom events. By configuring triggers, you can start your UiPath processes automatically from Orchestrator when these events occur, enabling near real-time automation workflows across different applications. (UiPath Integration Service documentation1) References:
1: Integration Service - Triggers - UiPath Documentation Portal
NEW QUESTION # 158
A developer needs to prioritize automating several processes. To help prevent any long-term maintenance, which process attribute should be avoided?
- A. Repetitive business process
- B. High volume work
- C. Frequent application changes
- D. Logical decision points
Answer: C
Explanation:
Explanation
Frequent application changes are a process attribute that should be avoided when prioritizing automating several processes. This is because frequent application changes can cause the automation to break or malfunction, and require constant maintenance and updates. Processes that are stable and consistent are more suitable for automation, as they reduce the risk of errors and rework. References: Process Selection Criteria and Process Analysis from UiPath documentation.
NEW QUESTION # 159
After generating a strict selector using the Indicate target on screen option within a Click activity, what should the developer utilize to view the complete list of attributes for the targeted UI element?
- A. Debug Mode
- B. Properties Panel
- C. Output Panel
- D. Open in UI Explorer
Answer: D
Explanation:
To view the complete list of attributes for the targeted UI element after generating a selector, the developer should use the "Open in UI Explorer" option. UI Explorer is a tool that provides a detailed view of the UI elements' properties and their full selectors. It allows for editing, validating, and testing selectors for better accuracy and reliability. Therefore, the correct answer is B.
References:
UiPath Studio Guide: UI Explorer
NEW QUESTION # 160
......
UiPath-ADAv1 Exam Questions and Valid PMP Dumps PDF: https://www.exam4free.com/UiPath-ADAv1-valid-dumps.html
UiPath UiPath-ADAv1 Certification Real 2024 Mock Exam: https://drive.google.com/open?id=1d0w0ob0N7VAaFjHaRLeau96GGaUDipIG
