Verified CT-TAE Exam Dumps PDF [2023] Access using Exam4Free
Try Best CT-TAE Exam Questions from Training Expert Exam4Free
ISTQB CT-TAE (Certified Tester Test Automation Engineer) Exam is a globally recognized certification program designed for software testers who specialize in test automation. Certified Tester Test Automation Engineer certification is ideal for individuals who want to advance their careers in test automation and demonstrate their expertise to potential employers. The CT-TAE certification is offered by the International Software Testing Qualifications Board (ISTQB), which is a non-profit organization that promotes software testing best practices and provides training and certification programs for software testers.
NEW QUESTION # 31
Your project is transitioning from manual to automated testing. You have decided to implement a pilot project so that lessons learned can inform future time estimates and schedules.
Which two of the following represent the types of test cases that are MOST suited to a test automation pilot project?
a) High added value test cases that require little effort to automate.
b) Test that are run infrequently as these will be simpler to automate
c) Reliability test cases that can show added value soon
d) Technically challenging test cases to provide the best validation of manual test conversion e) Tests that are least Important to the business as these are safer to trial
- A. a and c
- B. a and b
- C. c and e
- D. b and d
Answer: A
NEW QUESTION # 32
You have investigated a new tool which enables the modelling of the SUT and can then generate test cases either manually or automatically. You have convinced your managers that the best way forward is to conduct a pilot project for this tool. You need to select a project to use for the pilot. You have the choice of the following projects:
Project A: A two-year project that is critical to the business and is currently in the requirement phase. This project is for a new e-commerce web site and is mostly being developed "in-house" although the payment system is being developed and delivered by a 3rd party provider.
Project B: A safety critical application for software to drive and park cars.
Project C: An upgrade to an important HR timesheet tracking application that will be available on a desktop and mobile application. This is a 1-month project developed in-house.
Project D The payment system from project A.
Which project would be BEST for the pilot?
- A. Project A because it is a large project and has high visibility and is in the requirement phase.
- B. Project D because it is a small part of a larger project and will help show the tool's capabilities.
- C. Project C because it is a short, low priority project but is important.
- D. Project B because it is a safety critical system and has high visibility.
Answer: B
NEW QUESTION # 33
If model-based testing has been selected for the overall test automation approach for a project, how does that influence the layers of the TAA?
- A. All layers are used, but the test generation layer will be automated based on the defined model
- B. No adaptation will be needed because the interfaces will be defined by the model
- C. There will be no need to design the tests for the API because those will be covered by the model
- D. There will be no need for the execution layer
Answer: A
NEW QUESTION # 34
You identified a suitable project to pilot an automation tool and planned and conduced a pilot. The pilot has been successful and tool Is being deployed within your organization, with a plan to increase tool use by the one project at a time. During this rollout some test processes will be changed slightly to gain additional benefits from using the tool.
In the pilot project, a small set of manual tests were automated for the first time. You are currently monitoring the test automation efficiency and this reveals that the automation regime for the tests is not yet mature.
Which of the following statements is TRUE?
- A. The pilot project should have been critical so that maximum benefits were delivered
- B. The test process should be radically changed to gain additional benefits from using the tool.
- C. The target defined for the project was inappropriate, because the automation regime for the automated tests at the end of the pilot is not yet mature.
- D. The approach used for deployed this tool is aligned to the standard success factor for deployment
Answer: D
NEW QUESTION # 35
Which of the following is NOT an advantage of test automation?
- A. The ability to perform tests which would be difficult or impossible to execute manually
- B. The ability to run more tests in less time and therefore to make it possible to run them more often
- C. The ability to find more defects with the same tests, compared to executing the same test manually
- D. The ability to enable a better use of skilled testers by freeing them from repetitive and boring tasks
Answer: C
NEW QUESTION # 36
Which of the following is NOT a technical design consideration for a TAA?
- A. The number of users for the SUT
- B. Standards and Legal requirements, e.g data privacy
- C. Availability of interfaces for the SUT to be testable
- D. Data used by the SUT, e.g configuration, users
Answer: A
NEW QUESTION # 37
You are using a gTAA to create a TAS for a project. The TAS is aimed at automatically and executing test cases based on a use-case Modeling approaching that uses UML as a modeling language. All the interaction between TAS and SUT will only be at the API and GUI level.
Which of the following components of the gTAA would you EXCLUDE from the TAS?
- A. The test reporting component of the test execution layer.
- B. The test execution (test engine of the test execution layer
- C. The Test execution component of the test generation layer
- D. The Command Line Interface (CLI) component of the test adaptation layer
Answer: D
NEW QUESTION # 38
If you are tracking the frequency that a test automation code reports a defect that is not really a defect, what metric are you gathering?
- A. Tool scripting metrics
- B. Trend metrics
- C. The number of false-fail results
- D. Automation code defect density
Answer: C
NEW QUESTION # 39
What is NOT a factor in considering when you are asked to ensure an effective transition from manual to automated tests?
- A. The controllability of the SUT
- B. Correctness of test data and test cases
- C. Complexity to automate the manual test cases
- D. The look and feel of the SUT
Answer: D
NEW QUESTION # 40
Consider a TAS that uses a keyword-driven framework. The SUT is a web application and there is a large set of keywords available for writing the automated tests that relate to highly specific user actions linked directly to the GUI of the SUT. The automated test written with the keywords are statically analyzed by a custom tool which highlight's repeated instances of identical sequence of keywords. The waiting mechanism implemented by the TAS for a webpage load is based on a synchronous sampling within a given timeout. The TAS allows checking a webpage load every seconds until a timeout value
- A. Changing the scripting approach to data-driven scripting
- B. Implementing keywords with a higher level of granularity
- C. Changing the wait mechanism to explicit hard-coded waits
- D. Establishing an error recovery process for TAS and SUT
Answer: C
NEW QUESTION # 41
You are working on a government system called "Making Tax Digital" or MTD for short. This system is being implemented to stop manual human input error and also to reduce fraudulent behaviour from companies when submitting their tax and VAT returns.
The key concept is that registered companies will need to use government recommended 3rd party software for their accounts and book keeping. These 3rd party applications will have a direct interface into the government's main system for transactions and submissions.
You have been using a test execution tool successfully on the project so far. and have implemented a basic "capture/replay" approach to scripting.
The management have been encouraged with the automation so far, but want the following objectives to be met:
* Test cases added easily
* Reduction in the amount of scripts and script duplication
* Reduction in maintenance costs
Which scripting technique would be MOST suitable in this scenario in order to meet the objectives?
- A. Structured scripting
- B. Linear scripting
- C. Data-driven scripting
- D. Keyword-driven scripting
Answer: D
NEW QUESTION # 42
You are currently designing the TAA of a TAS. You have been asked to adopt an approach for automatically generating and executing test cases from a model that defines the SUT. The SUT is a state-based and event-driven that is described by a finite-state machine and exposes its functionality via an API. The behavior of the SUT depends on hardware and communication links that can be unreliable.
Which of the following aspects is MOST important when designing the TAA in this scenario?
- A. Looking for tools that allows direct denoting of exceptions and actions depending on the SUT events.
- B. Adopting a test definition strategy based on use case/exception case coverage for the definition layer.
- C. Adopting a test definition strategy based on classification tree coverage for the test definition layer.
- D. Looking for tools that allow performing setup and teardown of the test suites and the SUT.
Answer: D
NEW QUESTION # 43
Which of the following statement about the implementation of automated regression testing is FALSE?
- A. When automating regression tests, consideration should be given to how much time would be saved by automation
- B. When automating regression tests, the initialization steps set the test preconditions should be automated wherever possible
- C. When automating regression tests, the corresponding manual tests should have already been executed to verify they operate correctly
- D. When automating regression tests, the structure of automated tests must always be the same as the corresponding manual tests
Answer: A
NEW QUESTION # 44
A regression test suite consist of 500 test cases which are all executed manually. The business case for a pilot project is based on the adoption of test automation using a commercial tool that will reduce the execution time by a factor of 90% for 100% of the tests in the regression test suite. The pilot project lasted one month ( as planned) and you are currently its results. At the end of the pilot project, 40% of the regression tests have been automated and their execution time has been reduce by 60%.
Which of the following statements is TRUE in this scenario?
- A. The duration of the pilot project was too short -it should last unit the success factors are achieved
- B. The project selected for the pilot is too critical -if should not be too critical or too trivial
- C. The target defined for the business case seems difficult to hit - it should be realistic
- D. The target defined for the business case is too accurate -it should not be measureable
Answer: C
NEW QUESTION # 45
Which of the following statements does NOT describe good practice for maintaining the TAS?
- A. The TAS must run in the development environment because development and programming knowledge are required for its maintainability
- B. The TAS must consist of components that can be easily replaced without affecting the overall behavior of the TAS itself
- C. The TAS must be under configuration management, along with the test suite, the testware artefacts and the test environment in which it runs
- D. The TAS must separate the test scripts from the environment in which it runs and from the associated harnesses and artefacts
Answer: A
NEW QUESTION # 46
Your functional regression test automation suite ran successfully for the first two sprints and no failures were encountered during the runs. The automation suite records the status of each test case as either 'pass' or 'fail' and has excellent recovery capability built in.
For the third sprint, the TAS log reported several test cases with a status of 'fail'. You investigated each test case and found that most failures were due to a defect in one of the keyword scripts, rather than in the SUT. For those where the failure was in the SUT, defect reports were raised but several were returned by the developers asking for more information to enable them to reproduce the problem.
Which additional log items SHOULD you add to the TAS that would BEST improve failure analysis and defect reporting for future sprints?
a) Dynamic measurement information about the SUT.
b) A status of TAS error', in additional to pass' and 'fail', for each test case.
c) Use of a colour coding scheme so that 'pass' is in red and fail' is in green.
d) A counter to determine how many times each test case has been executed.
e) System configuration information including software/firmware and operating system versions.
f) A copy of the source code for all Keyword scripts executed.
- A. a and b
- B. a and c
- C. d and e
- D. b and e
Answer: C
NEW QUESTION # 47
Your company is new to test automation and as TAE. you have designed a TAS which successfully supports the SUT for the current project.
There are other systems currently in operation which have been tested manually and more systems are planned over the coming years. Based on this success, your company requires test automation be rolled out to other current and future SUTs with consistency being a key objective.
Which of the following is the BEST way to achieve that?
- A. Check for correct connectivity to internal and external systems to ensure that the TAS has been installed and configured correctly for each SUT.
- B. Install the current TAS into a central repository so that other tests on different SUTs use the same version of the TAS.
- C. Design a new TAS for each SUT, and manage each one through a dedicated automation support team.
- D. Develop a tool that keeps track of automation failures across the different SUTs and produces regular reports to stakeholders.
Answer: B
NEW QUESTION # 48
You are a TAE working for a software house which provides quarterly releases of its software to its customers. There are many different versions of the SUT that need to be tested simultaneously by different tests teams.
Your TAS is complex and you need to ensure it remains consistent across the different SUT environments. What is the BEST and MOST efficient way to ensure each of the test teams use the same version of the TAS to test the different versions of the SUT?
- A. Produce comprehensive documentation of the TAS, installation and usage guidelines and provide training for each team member.
- B. Install the TAS is a central repository and have an automated installation and configuration of the TAS from this repository to each of the SUT environments.
- C. Due to the complexities involved and the high risks associated with these releases, it would be best to revert to manual testing.
- D. Develop a tool to track historical test results across the different SUT environments and look for trends.
Answer: B
NEW QUESTION # 49
What are the four horizontal layers of the gTAA?
- A. Test generation, test execution, test definition, test APIs
- B. Test adaptation, test execution, test design, test definition
- C. Test generation, test definition, test execution, test adaptation
- D. Test definition, test execution, test reporting, test adaptation
Answer: C
NEW QUESTION # 50
Consider the following example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?
- A. A is and external TAS metric and b is an internal TAS metric
- B. A and b are both external TAS metric
- C. A and B are both internal TAS metrics
- D. A is an internal TAS metric and B is an external TAS metric
Answer: A
NEW QUESTION # 51
You are planning the pilot for an in-house developed Test Automation solution (TAS).
Which two of the following would be important steps to take as part of the planning process?
a) Review your organisation's current projects and identify which one would be most suitable to pilot the TAS.
b) Ensure that the developers will provide the necessary commitment for the TAS deployment activities.
c) Run a series of training workshops for new users of the TAS before they are asked to use it.
d) Develop a project plan for the pilot and reserve the necessary budget and resources for its implementation.
e) Ask the developers to provide any missing functionality during the deployment activities.
- A. c and d
- B. a and b
- C. c and e
- D. b and d
Answer: D
NEW QUESTION # 52
You have been asked to automate a set of functional tests at system Test level via the CLI of the SUT for the first release of a software system. The automated tests will be delivered to the learn in change of maintenance testing, who will use them for part of the regression testing. They have the following requirements.
1. The automated tests must be as fast and cheap to maintain as possible
2. The cost of adding new automated tests must be as low as possible
3. The automated tests must have a high level of independence from the tool itself Which of the following scripting techniques would be MOST suitable?
- A. Linear scripting
- B. Data-driven scripting
- C. Keyword-driven scripting
- D. Structure scripting
Answer: D
NEW QUESTION # 53
You have inherited a TAS that is working well it uses keyword-driven scripting and was well architected. The automation architect who built the system has now moved on to another company. The TAS is working across several projects and has a multiple library of keywords, categorised by project. The individual project teams maintain these keyword scripts.
Based only on the given information, what is the MOST significant risk for the TAS?
- A. The level of abstraction, coupled with the departure of the architect may make the system hard to maintain
- B. The keyword driven scripts may become out of date if not maintained
- C. New projects may not work as well with the TAS as the current projects
- D. Because the keyword scripts are maintained by different teams, there is a likelihood that good coding standards are not followed
Answer: A
NEW QUESTION # 54
As a TAE you are evaluating a functional test automation tool that will be for several projects within your organization. The projects require that tool to work effectively and efficiently with SUT's in distributed environments. The test automated tool also needs to interface with other existing test tools (test management tool and defect tracking tool.) The existing test tools subject to planned updates and their interface to the test automated tool may not work property after these updates.
Which of the following are the two LEAST important concerns related to the evaluation of the test automation in this scenario?
Is the test automation tool able to launch processors and execute test cases on multiple machines in different environments?
Does the test automation tool support a licensing scheme that allows accessing different sets?
Does the test automation tool have a large feature set, but only part of the features will be sets?
Do the release notes for the planned updates on existing specify the impacts on their interfaces to other tools?
Does the test automation tool need to install specific libraries that could impact the SUT?
- A. B and E
- B. C and D
- C. A and C
- D. A and E
Answer: A
NEW QUESTION # 55
......
To become certified, candidates must pass the CT-TAE certification exam, which is a rigorous, three-hour test consisting of 40 multiple-choice questions. CT-TAE exam is designed to evaluate the candidate's understanding of fundamental test automation concepts, as well as their ability to apply these concepts in practical situations. Candidates must achieve a minimum score of 65% to pass the exam.
Latest 100% Passing Guarantee - Brilliant CT-TAE Exam Questions PDF: https://www.exam4free.com/CT-TAE-valid-dumps.html
Practice Examples and Dumps & Tips for 2023 Latest CT-TAE Valid Tests Dumps: https://drive.google.com/open?id=1PcS5tuY_6Inx1Lsu5OMSmMTfcmKMgMFr
