Full refund

We promise you pass exam 100%. But if you lose exam with our H3C Large-Scale Routing Network Technologies V2.0 - GB0-381-ENU exam pdf, we will full refund. Or you can wait the updating or free change to other dumps if you have other test.

For most office workers who have no much time and energy to prepare H3CSE-Routing & Switching real exam, choosing best study materials is effective and smart way to help them pass exam at first attempt. It is well known that H3C real exam is one of high-quality and authoritative certification exam in the IT field, you need to study hard to prepare the H3C Large-Scale Routing Network Technologies V2.0 exam questions to prevent waste high H3C Large-Scale Routing Network Technologies V2.0 exam cost. Our website will provide you with latest H3C Large-Scale Routing Network Technologies V2.0 exam pdf to help you prepare exam smoothly and ensure you high pass rate. The key of our success is providing customers with the most reliable exam dumps and the most comprehensive service.

We are a group of professional IT experts and certified trainers who focus on the study of H3C Large-Scale Routing Network Technologies V2.0 practice exam for many years and offer valid GB0-381-ENU H3C Large-Scale Routing Network Technologies V2.0 exam questions to our customers. Besides, our colleagues always check the updating of H3C Large-Scale Routing Network Technologies V2.0 exam dumps to ensure the accuracy of our questions. Our H3C Large-Scale Routing Network Technologies V2.0 practice exam is based on the real test to help you get used to the atmosphere of H3C Large-Scale Routing Network Technologies V2.0 real exam.

We guarantee you pass exam 100%. There are H3C Large-Scale Routing Network Technologies V2.0 free demo for you download that you can know our ability clearly before you buy. Comparing to attend classes in training institution, our GB0-381-ENU H3C Large-Scale Routing Network Technologies V2.0 exam pdf is more affordable, effective and time-saving. You just need to practice H3C Large-Scale Routing Network Technologies V2.0 exam questions in your spare time and remember the answer, and then you will pass H3C Large-Scale Routing Network Technologies V2.0 real exam absolutely.

Choosing Exam4Free, choosing success. Our H3C Large-Scale Routing Network Technologies V2.0 exam dumps not only save your time and money, but also ensures you pass exam with high rate.

One-year free update (GB0-381-ENU exam dumps)

You will be allowed to free update your H3C Large-Scale Routing Network Technologies V2.0 exam questions after you purchased. Once there are updating of GB0-381-ENU H3C Large-Scale Routing Network Technologies V2.0 exam dumps, our system will send the latest version to your email immediately.

24/7 customer assisting

There are 24/7 customer assisting to support you in case you may encounter some problems about products. Please feel free to contact us if you have any questions.

Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

H3C GB0-381-ENU Exam Syllabus Topics:

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

1. A local area network has been running for 1 year (8,760 hours) and has been shut down for 8 hours due to equipment failure. Later, after the network was expanded and new equipment was added, it ran for another year, and was stopped for another 3 hours due to software failure.
Which of the following statements is true about the availability of this network (Avalabilit)?

A) The availability of the network is 99.96% since its inception
B) Before expansion, network availability was 99.91%
C) Availability after network expansion is better than before expansion
D) Availability after network expansion is worse than before expansion

2. In the broadcast network of OSPF, there are 4 routers RTA, RTB, RTC and RTD in the same network segment, their priorities are 2, 1, 1 and 0 respectively, and the Router IDs are 192.168.1.1, 192.168.2.1, 192.168 respectively. 3.1 and 192.168.4.1. If the OSPF protocol is enabled on these 4 routers at the same time, the BDR selected by OSPF is _____.

A) RTD
B) RTB
C) RTA
D) RTC

3. IS-IS belongs to the ________ routing protocol and adopts the ________ algorithm.

A) EGP, Shortest Path First (SPF)
B) EGP , distance vector (DV)
C) IGP , distance vector (DV)
D) IGP, Shortest Path First (SPF)

4. In the topology shown in the figure, execute the following command on the RTA router:
RTA-ospf-1] default-route-advertise
RTA] ip route-static 0.0.0.0 0.0.0.0 192.168.0.2
The default route cannot be observed in the routing table of the RTC router, the possible reason is ______

A) RTA's default route does not enter the OSPF area through the import command
B) Area1 is configured as an NSSA area
C) A routing policy is configured on the RTC to filter the default route
D) RTA's default route next hop address 192.168.0.2 is unreachable

5. In the topology shown in the figure, the following configurations are performed on RTA and RTB respectively:
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB]ospf 1
RTB-ospf-1]area 1
rtb-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
If area 2 needs to be configured as a TotalStub area, how should it be configured on RTC and RTD?

A) B.RTC]ospf 1 RTC-ospf-1]area 0 RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTC-ospf-1-area-0.0.0.0]area 2 RTC-ospf-1-area-0.0.0.2]stub no-summarRTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD]ospf 1 RTD-ospf-1]area 2 RTD-ospf -1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD-ospf-1]area 0 RTD-ospf-1-area-0.0.0.0]stub
B) RTC]ospf 1 RTC-ospf-1]area 0 RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTC-ospf-1-area-0.0.0.0]area 2 RTC -ospf-1-area-0.0.0.2]stub RTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD]ospf 1 RTD-ospf-1]area 2 RTD-ospf-1-area -0.0.0.2]network 30.0.0.0 0.0.0.255 rtd-ospf-1-area-0.0.0.2]stub no-summar
C) C.RTC]ospf 1 RTC-ospf-1]area 0 RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTC-ospf-1-area-0.0.0.0]area 2 RTC-ospf-1-area-0.0.0.2]stub no-summarRTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD]ospf 1 RTD-ospf-1]area 2 RTD-ospf -1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 rtd-ospf-1-area-0.0.0.2]stub no-summar
D) A.RTC]ospf 1 RTC-ospf-1]area 0 RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255 RTC-ospf-1-area-0.0.0.0]area 2 RTC-ospf-1-area-0.0.0.2]stub RTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255 RTD]ospf 1 RTD-ospf-1]area 2 RTD-ospf-1 -area-0.0.0.2]network 20.0.0.0 0.0.0.255 RTD-ospf-1-area-0.0.0.2]stub

Solutions: