Prepare 300-615 Question Answers - 300-615 Exam Dumps
Real Cisco 300-615 Exam Questions [Updated 2022]
The Cisco 300-615 exam is the perfect option for those individuals who want to validate their skills in troubleshooting the data center along with its network, storage, automation, operations, and more. This is one of the concentration tests designed for earning the CCNP Data Center certification, which must be taken after the core exam, known as 350-601 DCCOR. For those students who pass only the 300-615 test, the vendor will grant the Cisco Certified Specialist – Data Center Operations certificate.
NEW QUESTION 39
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
- A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - B. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - C. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - D. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooti
NEW QUESTION 40
Refer to the exhibit.
An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?
- A. Set the distribute policy of the zone to full.
- B. Import or export a zone set between the switches to synchronize the switches.
- C. Change the name of one of the zones to match the other zone set.
- D. Ensure that the zone members have different names.
Answer: B
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pdf
NEW QUESTION 41
Refer to the exhibit.
An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Statically configure the target information in the Boot Policy.
- B. Configure an MTU size of 9000 on the appliance port.
- C. Configure a QoS policy on the vNIC.
- D. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
Answer: A
NEW QUESTION 42
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Configure the same HSRP group on both devices.
- B. Configure HSRP version 2.
- C. Enable IP redirects.
- D. Set the MTU to 1500 bytes.
Answer: C
NEW QUESTION 43
Refer to the exhibit.
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
- A. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
- B. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.
- C. Reconfigure the initiator and the target to be in the same zones.
- D. Reactivate the zoneset.
Answer: C
NEW QUESTION 44
Refer to the exhibit. An engineer troubleshoots an OSPF neighborship problem between Router R2 and Router R10. Which action resolves the problem?
- A. Change area ID on Router R10
- B. Resolve unicast reply from Router R2
- C. Change router ID on Router R10
- D. Resolve authentication type on Router R10
Answer: B
NEW QUESTION 45
Refer to the exhibit.
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. environment variable
- B. event-default action statement
- C. configure terminal action
- D. event statement
Answer: D
NEW QUESTION 46 
Refer to the exhibit. The HSRP instance on both switches is showing as active. Which action resolves the issue?
- A. Configure preempt on only one of the switches.
- B. Allow VLAN 100 between the switches.
- C. Configure the IP address of N9K-B on the same subnet as N9K-A.
- D. Configure the HSRP timers to be the same.
Answer: B
Explanation:
Section: Network
Explanation
NEW QUESTION 47
A server fails to boot from the operating system after a RAID1 cluster migration. The RAID remains in an inactive state during and after a service profile association. Which action resolves the issue?
- A. Configure the SAN boot target in the service profile.
- B. Remove the local disk configuration policy.
- C. Use a predefined local disk configuration policy.
- D. Configure the SAN boot target to any configuration mode.
Answer: C
NEW QUESTION 48
A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?
- A. Verify that the SFPs are supported.
- B. Run the switchport ignore bit-errors command on the interface.
- C. Change the SFP to operate at 4 Gbps instead of 2 Gbps.
- D. Run the shutdown and then no shutdown command on the interface.
Answer: B
Explanation:
Section: Storage Network
Explanation
NEW QUESTION 49
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
- A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - B. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - C. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - D. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooti
NEW QUESTION 50
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership.
What is the cause of the issue?
- A. The same Fabric Name value should be used before after wiping all devices.
- B. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- C. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
- D. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
Answer: B
NEW QUESTION 51
Refer to the exhibit.
The HSRP instance on both switches is showing as active. Which action resolves the issue?
- A. Configure preempt on only one of the switches.
- B. Allow VLAN 100 between the switches.
- C. Configure the IP address of N9K-B on the same subnet as N9K-A.
- D. Configure the HSRP timers to be the same.
Answer: B
NEW QUESTION 52
A network administrator attempts to install an application in the Cisco NX-OS Guest shell and receives an error that there is not enough space on the disk. Which command must the administrator run to increase the disk space available in the Guest shell?
- A. guestshell pvextend rootfs [size-in-MB]
- B. guestshell resize rootfs [size-in-MB]
- C. guestshell growdisk rootfs [size-in-MB]
- D. guestshell resize2fs rootfs [size-in-MB]
Answer: B
NEW QUESTION 53
Refer to the exhibits.
An engineer troubleshoots switch N5K1, which fails to receive traffic from the file server Which set of actions resolves this problem?
- A. Bind native VLAN 10 with Ethemet10/1/1 and allow VLAN 10 in trunk configuration
- B. Assign native VLAN 10 with fc2.'l - 2 and allow VLAN 10 in trunk configuration.
- C. Assign native VLAN 10 with vfc111 and allow VLAN 1101 in trunk configuration.
- D. Bind native VLAN 10 with Ethemet1/10 and allow VSAN 101 in trunk configuration.
Answer: D
NEW QUESTION 54
Refer to the exhibit.
Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.
* WAN-1 is for normal business-day activities.
* WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?
- A. The event timer must be written in epoch time format.
- B. The applet called "Backup" must include an action to remove the current static route.
- C. The Cron entry must be configured without double quotes.
- D. The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.
Answer: B
NEW QUESTION 55
Refer to the exhibit.
An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?
- A. Set the distribute policy of the zone to full.
- B. Import or export a zone set between the switches to synchronize the switches.
- C. Change the name of one of the zones to match the other zone set.
- D. Ensure that the zone members have different names.
Answer: B
Explanation:
Explanation
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pd
NEW QUESTION 56
Refer to the exhibit.
Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
- A. Update the FCNs database to contain names for VSAN 100.
- B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.
- C. Activate the correct zoneset for VSAN 100.
- D. Configure the upstream ports and the server ports to be in VSAN 100.
Answer: D
NEW QUESTION 57
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Enable IP redirects.
- B. Configure the same HSRP group on both devices.
- C. Configure HSRP version 2.
- D. Set the MTU to 1500 bytes.
Answer: C
NEW QUESTION 58
......
300-615 Exam Dumps Pass with Updated 2022: https://www.exam4free.com/300-615-valid-dumps.html
Free 300-615 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1hiunK7lx-RN5xzbgRKzSMr-tuh_3V5qO
